Community AlphaAlpha MUADMINS
PTPortuguês (Brasil)
Entrar
No MuADMINSConfig ScannerEnvie o zip dos seus arquivos: rates, drops, spots, limitesAbrirNo MuADMINSEncontre-nos no DiscordPeça ajuda, mostre o que está criando e converse sobre MU com outros donos de servidores.Abrir

MuADMINS

Soluções

Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.

16 soluções para “mucore” em Site · Limpar

  1. Site97d

    MuCore website Exchange System always shows 0 Online Hours although the character was online for hours (DarkMaster 97d server)

    The MuCore module reads the column OnlineMinutes, which did not exist in the database. 1. Take the online-time SQL script from the thread (it adds a column to MEMB_STAT and changes the st...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2019-07-25
  2. Siteany

    MuCore Premium 2.2.0: after adding a VIP module, the lower half of the template turns white on that page

    The module carries its own style code, written for MuCore 1.8, which overrides the template CSS. 1. Open the module file and look at the start: it has a style block (CSS) of its own. 2. R...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-09-24
  3. Site

    MuCore 1.0.6 admin panel: 'Edit module' and 'Edit pages' are broken

    1. The helper's advice was to use MuCore 1.0.8 (and XAMPP 1.7.1 for SQL 2000/2005, or XAMPP 1.7.7 with MSSQL enabled for SQL 2008 or newer). 2. Replacing the whole folder caused other pro...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2017-08-03
  4. Site

    MuCore 2.2.0: the add and edit buttons for modules do not show in the admin panel

    1. MuCore 2.2.0 does not work properly on PHP 7.x. 2. Run it on PHP 5.6: the topic starter installed XAMPP with PHP 5.6.40 plus the PDO fix for SQL Server. 3. On a web host, switch the PH...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2019-03-05
  5. SiteS4

    MuCore 1.0.6 with RMST 7.01.10c (Season 4.5-4.6): registration says 'server error'

    1. The site and the server did not use the same password method (MD5 on one side, plain on the other). 2. The topic starter restored the database version without MD5 and replaced the Join...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2011-06-01
  6. Site

    MuCore 1.08 rankings show only one character (or none) while players are online

    1. MuCore only ranks characters whose CtlCode is 0 in the Character table; characters with another value are left out. 2. In SQL Server set CtlCode to 0 for the normal player characters....

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2017-11-03
  7. SiteS6

    MuCore install on a web host: after the serial number step, step_1 of the installer shows nothing (Season 6 repack)

    1. Open the MuCore configuration file that holds the database settings. 2. Find $core['connection_type'] = "MSSQL";. 3. Change the value to lower case: $core['connection_type'] = "mssql";...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-03-23
  8. Siteany

    MuCore on a web host cannot connect to the MuOnline database on a Google Cloud VPS (Connection with MuOnline Database Failed), although 1433 is open in Windows.

    1. Enable TCP/IP and Named Pipes for the instance in SQL Server Configuration Manager and restart SQL. 2. Open TCP 1433 in the Windows firewall of the VPS. 3. Also open TCP 1433 in the cl...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-03-17
  9. Siteany

    MuCore does not load on XAMPP 7.2.1.

    1. MuCore needs the old mssql PHP extension that newer XAMPP/PHP 7 no longer ships. 2. Use XAMPP 1.7.1 (old PHP with the mssql extension) for MuCore, or move to a CMS that supports PDO sq...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2018-02-08
  10. Siteany

    After switching to new server files with a new database, the MuCore site no longer detects the database and players cannot register.

    1. The new database does not contain the MuCore tables. 2. Run the MuCore installer again against the new database so it creates its tables. 3. Check config.SQL.php points to the new DB.

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2018-11-19
  11. Siteany

    MuCore on XAMPP on the same VPS as SQL Server cannot connect to the database.

    1. Easiest: in the MuCore config.php change the connection type from MSSQL to ODBC. 2. Or open SQL Server Configuration Manager, enable TCP/IP and Named Pipes, and restart SQL Server. 3....

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2017-12-27
  12. Siteany

    After replacing MuCore 1.0.8 with MVCore 1.17.1 on the host, the installer does not appear and the site cannot connect to SQL.

    1. Delete all old files in public_html (leftover MuCore files and config). 2. Upload MVCore again; the installer then opens. 3. Enter the SQL data in the installer; it connects normally.

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2018-06-03
  13. Site

    MuCore change class module shows an error

    1. The module config holds a quest code that depends on the season of your server files; a code for another season gives this error. 2. Set the quest code that matches your season in the...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2017-02-20
  14. Siteany

    MuCore 2.2.0 installer stops with 'SQL Failed' at the connection step.

    1. Open TCP port 1433 in the Windows firewall. 2. In SQL Server Configuration Manager enable Named Pipes and TCP/IP, set IPAll TCP Port 1433. 3. Restart SQL Server and run the installer a...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-07-27
  15. Siteany

    MVCore 1.17.1 and MuCore 1.8 on XAMPP 1.7.1 both fail to connect to SQL Server 2008 R2, even with Named Pipes enabled.

    1. SQL Server was installed as the named instance SQLEXPRESS, so there was no MSSQLSERVER default instance. 2. Reinstall SQL Server with the default instance (MSSQLSERVER) and keep the sa...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2018-07-30
  16. Siteany

    WebEngine 1.0.9 with a remote SQL Server IP fails with 'Could not connect to database (1)', while MuCore connects to the same server without problems.

    1. In the WebEngine installer select the ODBC driver instead of dblib/sqlsrv. 2. Make sure the matching PHP ODBC extension is enabled and port 1433 is reachable. 3. Finish the install.

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2017-09-09

Vídeos no MUTube

Mais vídeos de “mucore”

Ainda com problema? Pergunte ao Assistente MU Buscar no MuGPS

MuADMINS Community Alpha: grátis, feito pela comunidade e em desenvolvimento ativo.