Community AlphaAlpha MUADMINS
PTPortuguês (Brasil)
Entrar
No MuADMINSConfig ScannerEnvie o zip dos seus arquivos: rates, drops, spots, limitesAbrirNo MuADMINSEncontre-nos no DiscordPeça ajuda, mostre o que está criando e converse sobre MU com outros donos de servidores.Abrir

MuADMINS

Soluções

Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.

43 soluções para “mssql” em Site · Limpar

  1. Site

    MuWeb 0.9 installer check shows Mssql: NO even after editing php.ini

    1. Install XAMPP 1.7.0 (it includes the mssql extension the site needs). 2. Put MuWeb 0.9 in its htdocs and open the installer again; Mssql now shows YES.

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2009-02-12
  2. Site

    Error #123 Loading php_mssql.dll Failed when installing DarksWeb, although the dll is in the ext folder

    1. Install AppServ 2.5.9 instead of the XAMPP / VertrigoServ builds that failed. 2. Edit C:\Windows\php.ini (the php.ini AppServ really uses) and enable extension=php_mssql.dll there. 3....

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2009-10-28
  3. Site

    Website error "Fatal error: Call to undefined function mssql_connect()" (XAMPP 1.7.7, SQL Server 2008, DarksWeb 0.3)

    New XAMPP builds no longer have the mssql_* functions these old sites use. 1. Install XAMPP 1.7.1 (said to be the last one with mssql_*), or add code that defines those functions to the s...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2019-02-07
  4. Site

    How do I show the guild logo (G_Mark) of a guild, for example the Castle Siege owner, on a PHP website with MSSQL?

    1. G_Mark in the Guild table is binary: turn it into text with bin2hex(). You get 64 hex digits, one per cell of an 8x8 grid. 2. Map each digit to a color: 0 transparent, 1 #000000, 2 #8c...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2020-07-01
  5. Siteany

    WebEngine on shared hosting cannot reach SQL on my VPS. Port 1433 is open and MuMaker connects from home, but the web install still fails.

    1. The hosting company may block outgoing traffic to port 1433. 2. In SQL Server Configuration Manager > TCP/IP > IP Addresses > IPAll set TCP Port to another free port and leave TCP Dyna...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2020-05-23
  6. Siteany

    MuCore 2.2.0 installer stops with 'SQL Failed' at the connection step.

    1. Open TCP port 1433 in the Windows firewall. 2. In SQL Server Configuration Manager enable Named Pipes and TCP/IP, set IPAll TCP Port 1433. 3. Restart SQL Server and run the installer a...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-07-27
  7. Siteany

    WebEngine 1.0.9 with a remote SQL Server IP fails with 'Could not connect to database (1)', while MuCore connects to the same server without problems.

    1. In the WebEngine installer select the ODBC driver instead of dblib/sqlsrv. 2. Make sure the matching PHP ODBC extension is enabled and port 1433 is reachable. 3. Finish the install.

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2017-09-09
  8. Site

    Website registration says "Your Account Has Been Created Successfully" but nothing is saved in the database

    The fix given: add the MD5 extension to SQL Server and install the site with MD5 on. 1. Copy the MD5 dll for SQL Server (shared in the thread) into the MSSQL\Binn folder of SQL Server. 2....

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2008-11-28
  9. Site

    No MU website works on XAMPP (Windows 7 64-bit): SQL connection errors and php.ini extension errors although the extension is enabled

    1. Turn User Account Control (UAC) back on if you had disabled it. 2. Install XAMPP again (version 1.7.1, the one these old MSSQL based sites need). 3. Put the site back and test; the SQL...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2017-07-28
  10. SiteS6

    MuCore install on a web host: after the serial number step, step_1 of the installer shows nothing (Season 6 repack)

    1. Open the MuCore configuration file that holds the database settings. 2. Find $core['connection_type'] = "MSSQL";. 3. Change the value to lower case: $core['connection_type'] = "mssql";...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-03-23
  11. Siteany

    MuCore does not load on XAMPP 7.2.1.

    1. MuCore needs the old mssql PHP extension that newer XAMPP/PHP 7 no longer ships. 2. Use XAMPP 1.7.1 (old PHP with the mssql extension) for MuCore, or move to a CMS that supports PDO sq...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2018-02-08
  12. Siteany

    MuCore on XAMPP on the same VPS as SQL Server cannot connect to the database.

    1. Easiest: in the MuCore config.php change the connection type from MSSQL to ODBC. 2. Or open SQL Server Configuration Manager, enable TCP/IP and Named Pipes, and restart SQL Server. 3....

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2017-12-27
  13. Siteany

    WebEngine shows a PDOException with my SQL Server host, user and password on screen when the database is down. How do I hide it?

    1. The full stack trace is printed only because debug mode is turned on in your WebEngine configuration. 2. Turn debug mode off on the live site so visitors only see a generic error. 3. I...

    ✓ Confirmado na issueGitHub (lautaroangelico/WebEngine) · 2017-08-10
  14. Siteany

    MVCore 1.17.1 and MuCore 1.8 on XAMPP 1.7.1 both fail to connect to SQL Server 2008 R2, even with Named Pipes enabled.

    1. SQL Server was installed as the named instance SQLEXPRESS, so there was no MSSQLSERVER default instance. 2. Reinstall SQL Server with the default instance (MSSQLSERVER) and keep the sa...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2018-07-30
  15. Siteany

    After replacing MuCore 1.0.8 with MVCore 1.17.1 on the host, the installer does not appear and the site cannot connect to SQL.

    1. Delete all old files in public_html (leftover MuCore files and config). 2. Upload MVCore again; the installer then opens. 3. Enter the SQL data in the installer; it connects normally.

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2018-06-03
  16. Siteany

    WebEngine CMS on a web host cannot reach the SQL Server on a VPS: 'Could not connect to database (1)', even after opening port 1433 in the firewall and enabling TCP/IP.

    1. Check the usual items first: inbound rule for TCP 1433 in Windows Defender Firewall on the VPS, TCP/IP enabled in SQL Server Configuration Manager. 2. If it still fails, test whether t...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2025-02-12
  17. Siteany

    After the VPS (SQL) IP changed, a WebEngine CMS 1.2.4 site hosted on a separate Linux server shows 'Connection to database failed (MuOnline)' and the installer says the install is already complete.

    1. Open includes/config/webengine.json and set "webengine_cms_installed": false, then upload it. 2. In the web host cPanel open PHP Selector and (re)enable pdo_dblib and pdo_sqlsrv. 3. Ru...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2024-02-16
  18. SiteS6

    WebEngine CMS install keeps saying 'Could not connect to database (1)' with SQL Server 2008 and XAMPP (PDO ODBC), even though SSMS connects fine.

    1. The thread found a conflict between SQL Server 2008 and WebEngine's connection. 2. Install a newer SQL Server (2012 worked for the topic starter; another user had 2019 working). 3. Res...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2023-10-06
  19. Siteany

    Installing WebEngine CMS 1.2.5 with the ODBC driver fails with '[ODBC SQL Server Driver] The data types varchar(max) and text are incompatible in the equal to operator'.

    1. Do not use the old ODBC SQL Server driver for the install. 2. Install the Microsoft PHP SQLSRV / PDO_SQLSRV drivers that match your PHP version and enable them in php.ini. 3. Restart A...

    ✓ Confirmado na issueGitHub (lautaroangelico/WebEngine) · 2025-02-20
  20. Siteany

    MuCore on a web host cannot connect to the MuOnline database on a Google Cloud VPS (Connection with MuOnline Database Failed), although 1433 is open in Windows.

    1. Enable TCP/IP and Named Pipes for the instance in SQL Server Configuration Manager and restart SQL. 2. Open TCP 1433 in the Windows firewall of the VPS. 3. Also open TCP 1433 in the cl...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-03-17

Vídeos no MUTube

Mais vídeos de “mssql”

Ainda com problema? Pergunte ao Assistente MU Buscar no MuGPS

MuADMINS Community Alpha: grátis, feito pela comunidade e em desenvolvimento ativo.