MuADMINS
Çözümler
Yaygın MU Online sunucu, client ve web sitesi sorunları için kısa düzeltmeler; her biri kaynağı ve tarihiyle. “Onaylanmış”, soruyu soran kişinin düzeltmenin işe yaradığını söylediği anlamına gelir.
50 çözüm “port 80” için Sunucu kurulumu kategorisinde · Temizle
Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files
The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...
✓ Konu sahibi tarafından onaylandıDarksTeam · 2015-02-13Legion Team (Rodrigo117) files: GameServerCS shows an error at start while the normal GameServer runs
The common config of the GameServers was incomplete, so the normal GameServer and GameServerCS tried to use the same (wrong) port. 1. Open the common config file of each GameServer (norma...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2020-08-06OpenMU in Docker: game servers keep reporting my public IP to the client and -resolveIP / RESOLVE_IP seem ignored. How do I set loopback or local?
1. Open the admin panel and go to the game configuration, System section. 2. Change the IP Resolving setting (Public by default) to Loopback for same machine tests, Local for a LAN, or Cu...
✓ Sorun kaydında onaylandıGitHub (MUnique/OpenMU) · 2026-02-13MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.
1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-11-18MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?
1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-11-16I run one server on my VPS and want a second one with its own database on the same VPS, but it does not connect. What must change?
1. Give the second server its own database and create a new ODBC data source pointing to it (same driver, Server = (local), Database = new name). 2. Point the second JoinServer and DataSe...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2019-10-09SQL Server 2008 R2 setup crashes and closes while installing support files. Formatting and installing it before .NET did not help.
1. Stop using the repacked or modified installer you downloaded. 2. Download the SQL Server installer directly from Microsoft (a forum moderator linked the official download). 3. Run that...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2017-09-17Louis S6E3 server suddenly stops saving player data and seems to restart; SQL reports 'The transaction log for database MuOnline is full'.
1. The disk had no free space for the SQL transaction log. 2. Free or add disk space on the VPS (the topic starter added more GB). 3. Restart SQL Server and the MU servers.
✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-11-25MuEmu (compiled from source, antihack on): players are disconnected when moving to Crywolf and other GameServerCS maps, even with the CS port (55919) open.
1. Open GameServer - Common of the GameServer(s). 2. Add the missing CustomerName and CustomerHardwareId lines (needed after compiling with the antihack enabled). 3. Restart GameServer an...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2019-01-02Open source client (MuMain) cannot connect to OpenMU in the all-in-one Docker setup on the same PC.
In the client launcher, connect to the port where the game server registered (for Server0 it was 55902 in the log) instead of 44406. Check the server log to see which address and port eac...
✓ Sorun kaydında onaylandıGitHub (MUnique/OpenMU) · 2025-07-12The server works on the host PC, but other players cannot get in (MuEmu S8).
1. Exclude main.exe from DEP and add the client folder to the antivirus exceptions. 2. Open the antihack port 55999 in the Windows firewall and in the router. 3. Allow ConnectServer and G...
✓ Konu sahibi tarafından onaylandıTuServerMU · 2017-01-18Client disconnects right after choosing the server (server on a VPS)
The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2023-09-16DarksTeam 97d+99i moved to a VPS (Windows Server 2012 R2, SQL 2008 R2): RankingServer shows an error although the config did not change
The VPS firewall was blocking the RankingServer connections. 1. In Windows Firewall (and the VPS provider firewall, if any) allow the RankingServer program, or open the port it uses, for...
✓ Konu sahibi tarafından onaylandıTUServerMU · 2020-07-08OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?
1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...
Kaynağın MuADMINS tarafından yeniden yazılmış haliNot verifiedGitHub (MUnique/OpenMU docs) · 2026-10-11Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list
1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...
✓ Konu sahibi tarafından onaylandıRaGEZONE · 2024-12-10RMST Season 4.6: new moves added to the M (warp) window do not work
1. Check the matching lines of gate.txt (server) and gate.bmd (client) for those moves (lines 114 and 294 in the asker's files): if they are right, the server simply has no free moves lef...
✓ Konu sahibi tarafından onaylandıImperyus Games Brasil · 2010-12-30Mu Linux 97K: the Docker build of the server gets killed (out of memory) during the CMake build
1. The Dockerfile built with cmake --build /build -j, which runs unlimited parallel jobs and can trigger OOM kills on small VPS or CI machines. 2. Limit the parallel jobs: cmake -S . -B /...
✓ Sorun kaydında onaylandıGitHub (EmanuelCatania/Mu-Linux-0.97k) · 2026-08-17MUDevs free Season 20.2-3: where do I get the official files and how do I make the client main?
1. Download server and client only from the MUDevs Discord, #announcement channel (MediaFire links); copies from other sites are not supported. 2. Generate the main with the official tool...
✓ Konu sahibi tarafından onaylandıMUDevs · 2026-01-01OpenMU Docker server goes to 100% CPU after about two weeks (a kdevtmpfsi style crypto miner).
1. The maintainer found the way in: the Postgres port was exposed to the internet in the Traefik deployment (fixed in PR #435, July 2024). 2. Use the current deploy files, never publish p...
✓ Sorun kaydında onaylandıGitHub (MUnique/OpenMU) · 2024-07-17OpenMU in Docker on an OpenWrt VM (VMware, bridged Wi-Fi): the client cannot connect and the log shows InvalidPacketHeaderException.
1. That logged exception came from an HTTP client hitting the game server port, not from the MU client. 2. The real problem was packet forwarding of the bridged wireless network in VMware...
✓ Sorun kaydında onaylandıGitHub (MUnique/OpenMU) · 2024-04-16