Community AlphaAlpha MUADMINS
RUРусский
Войти
На MuADMINSConfig ScannerЗагрузите zip своих файлов: рейты, дропы, споты, лимитыОткрытьНа MuADMINSПрисоединяйтесь к нам в DiscordПросите помощи, показывайте свои проекты и общайтесь о MU с другими владельцами серверов.Открыть

MuADMINS

Решения

Короткие исправления частых проблем серверов, клиентов и сайтов MU Online, каждое с источником и датой. “Подтверждено” означает, что автор вопроса сообщил, что исправление сработало.

Решений: 91 по запросу “disconnected” в категории «Настройка сервера» · Сбросить

  1. Настройка сервераOpenMU

    OpenMU: a player stays 'already connected' after a dropped connection and cannot log in again, even with the right password

    1. The old session stays registered while the TCP connection to OpenMU is still open. With the web client the WebSocket proxy keeps that connection alive, so every new login gets AccountA...

    ✓ Подтверждено в issueGitHub (MUnique/OpenMU) · 2026-10-07
  2. Настройка сервераS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Подтверждено автором темыDarksTeam · 2008-06-03
  3. Настройка сервера

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Подтверждено автором темыDarksTeam · 2009-11-04
  4. Настройка сервера

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Подтверждено автором темыDarksTeam · 2010-12-21
  5. Настройка сервера97d+99i

    GameServer error at start with DarkMaster 97d+99i Beta 13 files, fixed by turning off the EventChip server connection

    1. Open Data\commonserver.cfg. 2. Find EventChipServerConnect = 1 and change it to EventChipServerConnect = 0. 3. Restart the GameServer.

    ✓ Подтверждено автором темыDarksTeam · 2011-04-23
  6. Настройка сервераIGCNS9

    IGCN S9 E2 repack: DataServer says 'Login failed for user ...' (SQLSTATE 28000) and 'DATA SERVER CANNOT CONNECT TO MSSQL'

    1. The repack DataServer config came with a SQL login that does not exist on your SQL Server (here a random name like D2a78Rtko0), so the login fails. 2. Open the database settings of the...

    ✓ Подтверждено автором темыRaGEZONE · 2019-07-14
  7. Настройка сервераMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Подтверждено автором темыTuServerMU · 2018-11-18
  8. Настройка сервераДругие файлы0.99b

    On a 0.99b server the ConnectServer closes by itself when I replace the numeric IP with a No-IP hostname. Why?

    1. Old 0.99b ConnectServer builds only accept an address as long as a numeric IP. 2. Keep the hostname at 14 characters or less including the dots (the length of a full IPv4 address strin...

    ✓ Подтверждено автором темыTuServerMU · 2021-02-10
  9. Настройка сервераOpenMUS6

    OpenMU in Docker on Windows: the client sees the server list but is disconnected when joining a server.

    1. Use the client version the server targets (1.04d English, Season 6 E3). 2. Open the ports in the Windows firewall (and allow NAT edge traversal). 3. The connect server hands out the IP...

    ✓ Подтверждено в issueGitHub (MUnique/OpenMU) · 2019-11-12
  10. Настройка сервера

    JoinServer and DataServer cannot connect to the database although the backup is restored

    These files had the database name MuOnlineS6 in the server configs while the database was restored as MuOnline, so the servers looked for a database that does not exist. 1. In SQL Server...

    ✓ Подтверждено автором темыTUServerMU · 2018-09-27
  11. Настройка сервера0.97d

    97d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct

    The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...

    ✓ Подтверждено автором темыTUServerMU · 2021-02-08
  12. Настройка сервераany

    ConnectServer and GameServer drop every few hours with WSASend error 10054 and protocol header errors once many players join.

    1. Check the real player limit of your files: these were built for 250 users, not 1000. 2. Above that number the server falls over. 3. Add a sub server (another GameServer) to spread play...

    ✓ Подтверждено автором темыTuServerMU · 2021-05-30
  13. Настройка сервераMuEmu / LouisS6

    MuEmu S6 by Louis: DataServer and JoinServer say 'Could not connect to database' with both included databases, even with correct IPs and open ports.

    1. The included ODBC .reg created a data source named MuOnlineS6 pointing to database MuOnlineS6. 2. Edit the ODBC data source (or the .reg) so the name and database match what the server...

    ✓ Подтверждено автором темыTuServerMU · 2017-10-10
  14. Настройка сервера

    Players show online on the website after the server closed, or accounts stay "online" (MEMB_STAT.ConnectStat stuck at 1)

    How it works in every MSSQL files family we read (IGCN, MuEmu, Louis, MSPro, X-Team, MuDevs, WebZen): at login the server runs WZ_CONNECT_MEMB, which inserts or updates MEMB_STAT with Con...

    Not verifiedНаписано MuADMINS
  15. Настройка сервераMuDevsS18, S20

    MuDevs: WZ_CONNECT_MEMB has 4 parameters (@HarwareID) and MEMB_STAT has HWID / OnlineHours

    MuDevs differs from the other MuEmu based files here: - WZ_CONNECT_MEMB @memb___id varchar(10), @ServerName varchar(50), @IP varchar(20), @HarwareID varchar(74) (4th parameter, spelled Ha...

    Not verifiedНаписано MuADMINS
  16. Настройка сервераIGCN

    IGCN License Manager: what the GameServer license errors mean (Cannot connect to Auth Server, Time Check Failed, IP Address or HWID not found, Activation Time is over)

    1. Cannot connect to Auth Server (first connect) or Failed to connect to any of auth servers (reconnect): check that the subscription is active, that the IPs in the license data on the Li...

    Пересказ источника от MuADMINSNot verifiedIGCN · 2022-03-28
  17. Настройка сервераMuEmu / Louis0.97k

    ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?

    1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...

    Пересказ источника от MuADMINSNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02
  18. Настройка сервера0.97d (97d+99i)

    GameServer 0.97 (DarksTeam 97d Beta 41) disconnects Dark Wizard / Soul Master with [ClientHack Detected : Editing AttackSpeed]

    The characters wear items that need more Strength or Agility than they have, so the attack speed check fires. 1. Either give the characters the stat points the items require, or 2. Open D...

    ✓ Подтверждено автором темыDarksTeam · 2018-12-29
  19. Настройка сервераMuEmu / LouisS8

    Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.

    1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...

    ✓ Подтверждено автором темыTuServerMU · 2020-06-17
  20. Настройка сервераMuEmu / LouisSeason 6 (Louis update 15)

    MuEditor cannot connect to SQL Server (Louis S6 update 15).

    1. Follow the Louis setup video for SQL and ODBC. 2. The missing part was opening the SQL port (1433 by default) in the firewall. 3. Open it and connect again.

    ✓ Подтверждено автором темыCreandoMU · 2020-08-14

MuADMINS Community Alpha: бесплатно, создаётся сообществом, в активной разработке.