Community AlphaAlpha MUADMINS
PLPolski
Zaloguj się
Na MuADMINSConfig ScannerWgraj zip swoich plików: rates, dropy, spoty, limityOtwórzNa MuADMINSSpotkajmy się na DiscordziePoproś o pomoc, pokaż, nad czym pracujesz, i rozmawiaj o MU z innymi właścicielami serwerów.Otwórz

MuADMINS

Rozwiązania

Krótkie poprawki częstych problemów z serwerem, klientem i stroną MU Online, każda ze źródłem i datą. “Potwierdzone” oznacza, że osoba, która pytała, potwierdziła, że poprawka zadziałała.

Rozwiązania: 91 dla “connect” w kategorii Konfiguracja serwera · Wyczyść

  1. Konfiguracja serwera

    JoinServer and DataServer cannot connect to the database although the backup is restored

    These files had the database name MuOnlineS6 in the server configs while the database was restored as MuOnline, so the servers looked for a database that does not exist. 1. In SQL Server...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2018-09-27
  2. Konfiguracja serwera

    Could not find stored procedure 'WZ_CONNECT_MEMB' (or WZ_DISCONNECT_MEMB): what they do and how to restore them

    WZ_CONNECT_MEMB and WZ_DISCONNECT_MEMB keep MEMB_STAT up to date (ConnectStat 1 at login, 0 at logout). They must exist in the database the JoinServer / DataServer connects to: - IGCN: in...

    Not verifiedNapisane przez MuADMINS
  3. Konfiguracja serwera

    Players show online on the website after the server closed, or accounts stay "online" (MEMB_STAT.ConnectStat stuck at 1)

    How it works in every MSSQL files family we read (IGCN, MuEmu, Louis, MSPro, X-Team, MuDevs, WebZen): at login the server runs WZ_CONNECT_MEMB, which inserts or updates MEMB_STAT with Con...

    Not verifiedNapisane przez MuADMINS
  4. Konfiguracja serweraMuDevsS18, S20

    MuDevs: WZ_CONNECT_MEMB has 4 parameters (@HarwareID) and MEMB_STAT has HWID / OnlineHours

    MuDevs differs from the other MuEmu based files here: - WZ_CONNECT_MEMB @memb___id varchar(10), @ServerName varchar(50), @IP varchar(20), @HarwareID varchar(74) (4th parameter, spelled Ha...

    Not verifiedNapisane przez MuADMINS
  5. Konfiguracja serweraMSProS2, S3, S6

    What are the MSPro database settings (ODBC, MD5Encryption, DisconnectOnlineAccount) and the update queries?

    MSPro files connect through the ODBC DSN named MuOnline: - JoinServer\JoinServer.ini: JoinServerODBC = MuOnline, CaseSensitive = 0, MD5Encryption = 0, MaxIPLimit = 0, MaxHwIDLimit = 0, Di...

    Not verifiedNapisane przez MuADMINS
  6. Konfiguracja serweraIGCN

    IGCN License Manager: what the GameServer license errors mean (Cannot connect to Auth Server, Time Check Failed, IP Address or HWID not found, Activation Time is over)

    1. Cannot connect to Auth Server (first connect) or Failed to connect to any of auth servers (reconnect): check that the subscription is active, that the IPs in the license data on the Li...

    Opracowanie źródła przez MuADMINSNot verifiedIGCN · 2022-03-28
  7. Konfiguracja serweraMuEmu / Louis0.97k

    ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?

    1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02
  8. Konfiguracja serwera

    Players are disconnected from the game about one minute after entering

    The anti-hack options in the GameServer config kick legit players. 1. Open MuServer\Data\commonserver.cfg and find SpeedHackPlayerBlock. 2. Set the anti-hack block like the working values...

    ✓ Potwierdzone przez autora tematuDarksTeam · 2011-01-25
  9. Konfiguracja serwera0.96 / 0.97

    GameServer error "error-L3 : Monster Level Overflow" and players get disconnected (0.96/0.97 era files)

    A monster in the monster list has a level above the limit of the GameServer (149 or 254 depending on the files). 1. Open the monster list (Monster.txt) and look for monsters with a very h...

    ✓ Potwierdzone przez autora tematuDarksTeam · 2024-03-11
  10. Konfiguracja serwera0.97d

    97d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct

    The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2021-02-08
  11. Konfiguracja serweraIGCNS9

    IGCN Season 9: some players are disconnected right after character select and the client log shows ResourceGuard integrity errors

    1. The client log alone can mislead: also open the server side AntiHack log of the GameServer. Here it showed [AntiHack] ... Hit Hack detected for the players who were dropped. 2. In the...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2026-02-04
  12. Konfiguracja serweraIGCNS9

    IGCN S9 E2 repack: IGC tools do not run and the client disconnects with 127.0.0.1 in the configs

    1. Do not use 127.0.0.1 in the server IP settings of this repack. 2. Open CMD, run ipconfig and take your IPv4 address. 3. Put that IPv4 address in every server IP setting (and in the cli...

    ✓ Potwierdzone przez autora tematuRaGEZONE · 2019-06-11
  13. Konfiguracja serweraany

    ConnectServer and GameServer drop every few hours with WSASend error 10054 and protocol header errors once many players join.

    1. Check the real player limit of your files: these were built for 250 users, not 1000. 2. Above that number the server falls over. 3. Add a sub server (another GameServer) to spread play...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2021-05-30
  14. Konfiguracja serweraMuEmu / LouisS6

    MuEmu (compiled from source, antihack on): players are disconnected when moving to Crywolf and other GameServerCS maps, even with the CS port (55919) open.

    1. Open GameServer - Common of the GameServer(s). 2. Add the missing CustomerName and CustomerHardwareId lines (needed after compiling with the antihack enabled). 3. Restart GameServer an...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2019-01-02
  15. Konfiguracja serweraMuEmu / LouisS6

    MuEmu S6 by Louis: DataServer and JoinServer say 'Could not connect to database' with both included databases, even with correct IPs and open ports.

    1. The included ODBC .reg created a data source named MuOnlineS6 pointing to database MuOnlineS6. 2. Edit the ODBC data source (or the .reg) so the name and database match what the server...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2017-10-10
  16. Konfiguracja serweraIGCNS15

    IGCN Season 15: at the 4th class quest phase 4, talking to the NPC to teleport freezes the game and then disconnects the player.

    1. Phase 4 runs on the instance server, whose port was not open. 2. Open the port of the instance GameServer in the Windows firewall (and router or VPS panel if used). 3. Start that serve...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2020-08-03
  17. Konfiguracja serweraMuDevsS16

    'You are disconnected from the server' at server select on an Amazon AWS VPS, even with all ports open in the Windows firewall (MuDevs S16 free files).

    Open the ports in the AWS console too: Security Groups > pick the right VPC/instance group > add inbound rules for the game ports. AWS blocks inbound traffic by default even when Windows...

    ✓ Potwierdzone przez autora tematuTuServerMU · 2021-04-27
  18. Konfiguracja serweraMuEmu / LouisSeason 6 (Louis update 15)

    MuEditor cannot connect to SQL Server (Louis S6 update 15).

    1. Follow the Louis setup video for SQL and ODBC. 2. The missing part was opening the SQL port (1433 by default) in the firewall. 3. Open it and connect again.

    ✓ Potwierdzone przez autora tematuCreandoMU · 2020-08-14
  19. Konfiguracja serweraS3E2

    DarksTeam Season 3 Episode 2 (Beta 19) Cash Shop: a bought Seal disappears after reconnect

    The seal was saved with a wrong date format in t_perioditem_info. 1. Open the stored procedure t_perioditem_insert in the MuOnline database. 2. Fix the datetime format it uses when insert...

    ✓ Potwierdzone przez autora tematuDarksTeam · 2009-08-09
  20. Konfiguracja serwera0.97d

    Aminyuz 97d files: GameServer gives a conexion.ini connection error at start although all IPs are right (EventServer and Ranking open fine)

    The SQL login in the Aminyuz connection file was wrong. 1. Open C:\MuServer\Aminyuz\Conexion (the connection ini of these files). 2. In the [SQL] block set Usuario = sa (your SQL user), C...

    ✓ Potwierdzone przez autora tematuTUServerMU · 2020-02-21

MuADMINS Community Alpha: za darmo, tworzone przez społeczność, w aktywnym rozwoju.