Community AlphaAlpha MUADMINS
VITiếng Việt
Đăng nhập
Trên MuADMINSConfig ScannerTải lên zip file của bạn: rate, rơi đồ, spot, giới hạnMởTrên MuADMINSGặp chúng tôi trên DiscordNhờ giúp đỡ, chia sẻ những gì bạn đang làm và trò chuyện về MU với các chủ server khác.Mở

MuADMINS

Giải pháp

Các cách sửa ngắn gọn cho những lỗi thường gặp của server, client và website MU Online, mỗi cách đều kèm nguồn và ngày. “Đã xác nhận” nghĩa là người đặt câu hỏi cho biết cách sửa đã hiệu quả.

186 giải pháp cho “server.xml” trong Cài đặt server · Xóa lọc

  1. Cài đặt server

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2024-12-10
  2. Cài đặt serverclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Được người mở chủ đề xác nhậnImperyus Games Brasil · 2009-10-30
  3. Cài đặt serverclassic

    How do I show sub servers grouped under one server in the list?

    1. In Connectserverlist.dat the codes are 0, 1, 2... 2. Change them to 0, 21, 41, 61 (steps of 20). 3. The ConnectServer then reads them as rooms of the servers.

    ✓ Được người mở chủ đề xác nhậnImperyus Games Brasil · 2010-12-14
  4. Cài đặt serverMuEmu / LouisSeason 6 (Louis)

    JoinServer and DataServer show "[SocketManager] WSAAccept() failed with error: 10061" on start.

    1. Check DataServerAddress in common.dat. 2. Leave it at the default 127.0.0.1, it does not need your public IP. 3. Start the servers again.

    ✓ Được người mở chủ đề xác nhậnCreandoMU · 2022-02-21
  5. Cài đặt serverS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2008-06-03
  6. Cài đặt server99b

    GameServer.exe loads for a long time and then Windows shows "Send error report / Don't Send" with every server pack

    The PC was infected with the Win32.Parite (A to C) file infector, which damages .exe files. 1. Download a Parite removal tool (the thread used AntiParite) and let it scan the processes. 2...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2008-06-19
  7. Cài đặt serverS2 (1.03N)

    Season 2 (1.03N): the server shows as full with Loading behind it when I click it

    1. Open GameServer\Data\ServerInfo.dat. 2. Find VirtualPlayerNum = 200 and change it to VirtualPlayerNum = 0. 3. Restart the GameServer.

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2008-06-27
  8. Cài đặt server

    How to protect the server from attackers with the firewall

    Only the ConnectServer and GameServer must be reachable from outside. 1. In the firewall block outside access for: MySQL (mysqld.exe), the DataServer(s), ExDB, EventServer, RankingServer,...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2008-06-30
  9. Cài đặt server

    Where to change the maximum number of users online (the GameServer shows 6500)

    1. Open the server's Data\commonserver.cfg. 2. Find NumberOfMaxUser and set the value you want. 3. Restart the GameServer.

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-01-18
  10. Cài đặt serverS2

    Season 2 server (SrTeam files) freezes after 2 to 3 hours: login just hangs

    The freeze came from the MonsterSetBase file. 1. Replace MonsterSetBase.txt with another, clean one (for example the original of the files). 2. Restart the server and watch it for a few h...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-02-27
  11. Cài đặt server

    All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"

    The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-05-24
  12. Cài đặt server

    Event server (Devil Square ranking) error: it looks for the wrong database

    1. Open the event server config svconfig.ini. 2. Change mu2003_dsn = Ranking to mu2003_dsn = MuOnline (the data source that really exists). 3. Restart the event server.

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-10-08
  13. Cài đặt server

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-11-04
  14. Cài đặt server

    SQL Server 2000 setup says there is not enough free disk space although 60 GB are free

    1. Extract the SQL Server 2000 installer files with WinRAR into a normal folder. 2. Run setup from that extracted folder.

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2010-08-08
  15. Cài đặt server

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2010-12-21
  16. Cài đặt server97d+99i

    GameServer error at start with DarkMaster 97d+99i Beta 13 files, fixed by turning off the EventChip server connection

    1. Open Data\commonserver.cfg. 2. Find EventChipServerConnect = 1 and change it to EventChipServerConnect = 0. 3. Restart the GameServer.

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2011-04-23
  17. Cài đặt server

    GameServer starts normally but crashes after a few minutes

    1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2011-05-11
  18. Cài đặt server0.99.62T (1.0M)

    JoinServer shows an error at start with the DarksTeam 0.99.62T release files

    The JoinServer was started directly, without its start parameters. 1. Do not run joinserver.exe by itself; start it from StartUp.exe. 2. In StartUp.exe give the JoinServer the parameters...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2012-09-08
  19. Cài đặt serverS2

    Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files

    The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2015-02-13
  20. Cài đặt server97d+99i

    "error-L1 : CloseClient INVALID_SOCKET": after some time online the GameServer disconnects all players (97d+99i, after moving from Windows Server 2003 to Windows Server 2012 R2)

    Reinstalling Windows, all updates and compatibility modes did not help; the fix was the newer DLL for the files. 1. Download the newer DLL that the developer uploaded for these 97d+99i fi...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2017-02-14

Video trên MUTube

Thêm video cho “server.xml”

Vẫn còn vướng mắc? Hỏi Trợ lý MU Tìm trên MuGPS

MuADMINS Community Alpha: miễn phí, do cộng đồng xây dựng, đang được phát triển tích cực.