Community AlphaAlpha MUADMINS
VITiếng Việt
Đăng nhập
Trên MuADMINSConfig ScannerTải lên zip file của bạn: rate, rơi đồ, spot, giới hạnMởTrên MuADMINSGặp chúng tôi trên DiscordNhờ giúp đỡ, chia sẻ những gì bạn đang làm và trò chuyện về MU với các chủ server khác.Mở

MuADMINS

Giải pháp

Các cách sửa ngắn gọn cho những lỗi thường gặp của server, client và website MU Online, mỗi cách đều kèm nguồn và ngày. “Đã xác nhận” nghĩa là người đặt câu hỏi cho biết cách sửa đã hiệu quả.

57 giải pháp cho “se resta” trong Cài đặt server · Xóa lọc

  1. Cài đặt serverOpenMUany

    OpenMU: after a restart all my configuration and data were gone and the database was initialized again.

    1. With Docker the Postgres data must live in a volume. 2. The provided docker-compose files persist it in volumes, so the data was lost because the volumes were deleted or the setup did...

    ✓ Đã xác nhận trong issueGitHub (MUnique/OpenMU) · 2023-11-11
  2. Cài đặt serverMSPro

    MSPro: GameServer does not open after a VPS restart or a move to a new VPS, and no error is shown

    The MSPro license is bound to the machine's HWID. A new VPS, or some VPS restarts, changes the HWID, and then the GameServer does not open and shows no error. 1. Request or regenerate the...

    ✓ Được người mở chủ đề xác nhậnDo MuADMINS biên soạn · 2026-10-31
  3. Cài đặt serverMuEmu / LouisS6

    Louis S6E3 server suddenly stops saving player data and seems to restart; SQL reports 'The transaction log for database MuOnline is full'.

    1. The disk had no free space for the SQL transaction log. 2. Free or add disk space on the VPS (the topic starter added more GB). 3. Restart SQL Server and the MU servers.

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2018-11-25
  4. Cài đặt serverclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Được người mở chủ đề xác nhậnImperyus Games Brasil · 2009-10-30
  5. Cài đặt server

    After about one hour of uptime nobody can log in: the login just keeps loading

    1. Set the server startup tool to reload (restart) the ConnectServer at an interval; the answer says this is done on all versions. 2. Restart the servers.

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-04-29
  6. Cài đặt serverclassic

    Custom items vanish when entering the Castle Siege map.

    1. The GS-CS Data folder had an older item(kor).txt without the new items. 2. Copy the same item file into the Data folder of every GameServer, GS-CS and sub servers. 3. Restart.

    ✓ Được người mở chủ đề xác nhậnImperyus Games Brasil · 2011-10-24
  7. Cài đặt serverclassic

    One GameServer room keeps closing by itself with nothing in the log.

    1. It happened when a box was opened. 2. The error was in eventitembag.txt. 3. Fix the bag lines and restart that room.

    ✓ Được người mở chủ đề xác nhậnImperyus Games Brasil · 2013-12-10
  8. Cài đặt serverMuEmu / LouisSeason 6 (Louis)

    Louis files: after testing the auction system no new auction starts (or it starts and ends at once).

    1. A finished auction does not run again. 2. Back up the database, then run on MuOnline: DELETE FROM EventAuction and DELETE FROM EventAuctionReward. 3. Restart the GameServer to start ne...

    ✓ Được người mở chủ đề xác nhậnCreandoMU · 2020-12-02
  9. Cài đặt serverS2 (1.03N)

    Season 2 (1.03N): the server shows as full with Loading behind it when I click it

    1. Open GameServer\Data\ServerInfo.dat. 2. Find VirtualPlayerNum = 200 and change it to VirtualPlayerNum = 0. 3. Restart the GameServer.

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2008-06-27
  10. Cài đặt server

    Where to change the maximum number of users online (the GameServer shows 6500)

    1. Open the server's Data\commonserver.cfg. 2. Find NumberOfMaxUser and set the value you want. 3. Restart the GameServer.

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-01-18
  11. Cài đặt serverS2

    Season 2 server (SrTeam files) freezes after 2 to 3 hours: login just hangs

    The freeze came from the MonsterSetBase file. 1. Replace MonsterSetBase.txt with another, clean one (for example the original of the files). 2. Restart the server and watch it for a few h...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-02-27
  12. Cài đặt server

    All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"

    The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-05-24
  13. Cài đặt server

    Event server (Devil Square ranking) error: it looks for the wrong database

    1. Open the event server config svconfig.ini. 2. Change mu2003_dsn = Ranking to mu2003_dsn = MuOnline (the data source that really exists). 3. Restart the event server.

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-10-08
  14. Cài đặt server

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2010-12-21
  15. Cài đặt server

    Players are disconnected from the game about one minute after entering

    The anti-hack options in the GameServer config kick legit players. 1. Open MuServer\Data\commonserver.cfg and find SpeedHackPlayerBlock. 2. Set the anti-hack block like the working values...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2011-01-25
  16. Cài đặt server97d+99i

    GameServer error at start with DarkMaster 97d+99i Beta 13 files, fixed by turning off the EventChip server connection

    1. Open Data\commonserver.cfg. 2. Find EventChipServerConnect = 1 and change it to EventChipServerConnect = 0. 3. Restart the GameServer.

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2011-04-23
  17. Cài đặt serverS2

    Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files

    The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2015-02-13
  18. Cài đặt server97d+99i

    "error-L1 : CloseClient INVALID_SOCKET": after some time online the GameServer disconnects all players (97d+99i, after moving from Windows Server 2003 to Windows Server 2012 R2)

    Reinstalling Windows, all updates and compatibility modes did not help; the fix was the newer DLL for the files. 1. Download the newer DLL that the developer uploaded for these 97d+99i fi...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2017-02-14
  19. Cài đặt server0.97d (97d+99i)

    GameServer 0.97 (DarksTeam 97d Beta 41) disconnects Dark Wizard / Soul Master with [ClientHack Detected : Editing AttackSpeed]

    The characters wear items that need more Strength or Agility than they have, so the attack speed check fires. 1. Either give the characters the stat points the items require, or 2. Open D...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2018-12-29
  20. Cài đặt server0.96 / 0.97

    GameServer error "error-L3 : Monster Level Overflow" and players get disconnected (0.96/0.97 era files)

    A monster in the monster list has a level above the limit of the GameServer (149 or 254 depending on the files). 1. Open the monster list (Monster.txt) and look for monsters with a very h...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2024-03-11

Video trên MUTube

Thêm video cho “se resta”

Vẫn còn vướng mắc? Hỏi Trợ lý MU Tìm trên MuGPS

MuADMINS Community Alpha: miễn phí, do cộng đồng xây dựng, đang được phát triển tích cực.