Community AlphaAlpha MUADMINS
VITiếng Việt
Đăng nhập
Trên MuADMINSConfig ScannerTải lên zip file của bạn: rate, rơi đồ, spot, giới hạnMởTrên MuADMINSGặp chúng tôi trên DiscordNhờ giúp đỡ, chia sẻ những gì bạn đang làm và trò chuyện về MU với các chủ server khác.Mở

MuADMINS

Giải pháp

Các cách sửa ngắn gọn cho những lỗi thường gặp của server, client và website MU Online, mỗi cách đều kèm nguồn và ngày. “Đã xác nhận” nghĩa là người đặt câu hỏi cho biết cách sửa đã hiệu quả.

63 giải pháp cho “game server does not start” trong Cài đặt server · Xóa lọc

  1. Cài đặt serverMSPro

    MSPro: GameServer does not open after a VPS restart or a move to a new VPS, and no error is shown

    The MSPro license is bound to the machine's HWID. A new VPS, or some VPS restarts, changes the HWID, and then the GameServer does not open and shows no error. 1. Request or regenerate the...

    ✓ Được người mở chủ đề xác nhậnDo MuADMINS biên soạn · 2026-10-31
  2. Cài đặt server

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2009-11-04
  3. Cài đặt server97d+99i

    GameServer error at start with DarkMaster 97d+99i Beta 13 files, fixed by turning off the EventChip server connection

    1. Open Data\commonserver.cfg. 2. Find EventChipServerConnect = 1 and change it to EventChipServerConnect = 0. 3. Restart the GameServer.

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2011-04-23
  4. Cài đặt server

    GameServer starts normally but crashes after a few minutes

    1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2011-05-11
  5. Cài đặt serverX-TeamSeason 15

    X-Team Season 15 files (update 5): GameServer shows a message that something 'does not exist' and will not start

    The error is about the server code and the GameServer common file of the update. 1. Check the ServerCode is the same in ConnectServer\ConnectServer.txt, Data\MapServerInfo and the GameSer...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2020-08-15
  6. Cài đặt serverMuEmu / LouisSeason 6

    Legion Team (Rodrigo117) files: GameServerCS shows an error at start while the normal GameServer runs

    The common config of the GameServers was incomplete, so the normal GameServer and GameServerCS tried to use the same (wrong) port. 1. Open the common config file of each GameServer (norma...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2020-08-06
  7. Cài đặt server0.97d

    Aminyuz 97d files: GameServer gives a conexion.ini connection error at start although all IPs are right (EventServer and Ranking open fine)

    The SQL login in the Aminyuz connection file was wrong. 1. Open C:\MuServer\Aminyuz\Conexion (the connection ini of these files). 2. In the [SQL] block set Usuario = sa (your SQL user), C...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2020-02-21
  8. Cài đặt serverS2

    Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails

    1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...

    ✓ Được người mở chủ đề xác nhậnRaGEZONE · 2018-10-25
  9. Cài đặt serverMuEmu / LouisS6

    MuEmu (compiled from source, antihack on): players are disconnected when moving to Crywolf and other GameServerCS maps, even with the CS port (55919) open.

    1. Open GameServer - Common of the GameServer(s). 2. Add the missing CustomerName and CustomerHardwareId lines (needed after compiling with the antihack enabled). 3. Restart GameServer an...

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2019-01-02
  10. Cài đặt serverany

    My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?

    1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...

    MuADMINS viết lại từ nguồnNot verifiedMicrosoft Learn · 2026-02-12
  11. Cài đặt serverOpenMUany

    OpenMU in Docker: game servers keep reporting my public IP to the client and -resolveIP / RESOLVE_IP seem ignored. How do I set loopback or local?

    1. Open the admin panel and go to the game configuration, System section. 2. Change the IP Resolving setting (Public by default) to Loopback for same machine tests, Local for a LAN, or Cu...

    ✓ Đã xác nhận trong issueGitHub (MUnique/OpenMU) · 2026-02-13
  12. Cài đặt serverany

    GameServer, DataServer or JoinServer will not start: MSVCR100.dll, MSVCP120.dll or VCRUNTIME140.dll is missing. Which runtime do I install?

    1. The number in the DLL name tells the Visual C++ version: 80 = 2005, 90 = 2008, 100 = 2010, 110 = 2012, 120 = 2013, 140 = 2015 to 2026. 2. Download the matching Visual C++ Redistributab...

    MuADMINS viết lại từ nguồnNot verifiedMicrosoft Learn · 2025-12-03
  13. Cài đặt serverMuEmu / LouisS6

    Louis S6 Up13 GameServer window never opens, shows an error and fills the folder with .dmp files after editing configs.

    1. Restore the original Data folder; if the server starts, the bad file is in there. 2. Put your edited files back one by one, starting with the ones you changed, until it fails again. 3....

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2021-10-11
  14. Cài đặt serverOpenMUany

    OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?

    1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...

    MuADMINS viết lại từ nguồnNot verifiedGitHub (MUnique/OpenMU docs) · 2026-10-11
  15. Cài đặt serverS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2008-06-03
  16. Cài đặt server99b

    GameServer.exe loads for a long time and then Windows shows "Send error report / Don't Send" with every server pack

    The PC was infected with the Win32.Parite (A to C) file infector, which damages .exe files. 1. Download a Parite removal tool (the thread used AntiParite) and let it scan the processes. 2...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2008-06-19
  17. Cài đặt server0.96 / 0.97

    GameServer error "error-L3 : Monster Level Overflow" and players get disconnected (0.96/0.97 era files)

    A monster in the monster list has a level above the limit of the GameServer (149 or 254 depending on the files). 1. Open the monster list (Monster.txt) and look for monsters with a very h...

    ✓ Được người mở chủ đề xác nhậnDarksTeam · 2024-03-11
  18. Cài đặt server0.97d

    97d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct

    The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2021-02-08
  19. Cài đặt serverMuEmu / LouisSeason 6

    MuEmu S6 with a normal and a VIP server: going from the VIP server to a GameServerCS map and back sends the player to the normal server

    The return server for each map is set in MapServerInfo, and it has to be set in both servers. 1. Open Data\MapServerInfo (MapServerMove section: ServerCode NotMoveOption NextMap NextServe...

    ✓ Được người mở chủ đề xác nhậnTUServerMU · 2020-09-25
  20. Cài đặt serverIGCNS9

    IGCN Season 9 repack: GameServerCS shows an error when Castle Siege is configured, even with correct settings.

    1. The SQL Server language caused it. 2. Install SQL Server in English (English instance) and restore the databases there. 3. Start GameServerCS again.

    ✓ Được người mở chủ đề xác nhậnTuServerMU · 2017-06-18
Vẫn còn vướng mắc? Hỏi Trợ lý MU Tìm trên MuGPS Tìm trên MUTube

MuADMINS Community Alpha: miễn phí, do cộng đồng xây dựng, đang được phát triển tích cực.