Community AlphaAlpha MUADMINS
TRTürkçe
Giriş yap
MuADMINS'teConfig ScannerDosyalarının zip'ini yükle: rate'ler, droplar, spotlar, limitlerAçMuADMINS'teDiscord'da buluşalımYardım iste, üzerinde çalıştığın şeyleri paylaş ve diğer sunucu sahipleriyle MU hakkında konuş.Aç

MuADMINS

Çözümler

Yaygın MU Online sunucu, client ve web sitesi sorunları için kısa düzeltmeler; her biri kaynağı ve tarihiyle. “Onaylanmış”, soruyu soran kişinin düzeltmenin işe yaradığını söylediği anlamına gelir.

40 çözüm “connectserver” için Sunucu kurulumu kategorisinde · Temizle

  1. Sunucu kurulumu

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Konu sahibi tarafından onaylandıDarksTeam · 2010-12-21
  2. Sunucu kurulumuDiğer server files0.99b

    On a 0.99b server the ConnectServer closes by itself when I replace the numeric IP with a No-IP hostname. Why?

    1. Old 0.99b ConnectServer builds only accept an address as long as a numeric IP. 2. Keep the hostname at 14 characters or less including the dots (the length of a full IPv4 address strin...

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2021-02-10
  3. Sunucu kurulumuMuEmu / Louis0.97k

    ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?

    1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...

    Kaynağın MuADMINS tarafından yeniden yazılmış haliNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02
  4. Sunucu kurulumuany

    ConnectServer and GameServer drop every few hours with WSASend error 10054 and protocol header errors once many players join.

    1. Check the real player limit of your files: these were built for 250 users, not 1000. 2. Above that number the server falls over. 3. Add a sub server (another GameServer) to spread play...

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2021-05-30
  5. Sunucu kurulumu

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2024-12-10
  6. Sunucu kurulumuMuEmu / Louis0.97k (update 23)

    Kayito 0.97k update 23: Chinese server names in ServerList.dat show garbled, changing the file encoding does not help.

    1. Update 23 converts the text with IsEncodingAnsi in MemScript.cpp, which broke it. 2. The maintainer corrected it for the next release (update 24), so update to update 24 or later. 3. A...

    ✓ Sorun kaydında onaylandıGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-08-30
  7. Sunucu kurulumuclassic

    How do I show sub servers grouped under one server in the list?

    1. In Connectserverlist.dat the codes are 0, 1, 2... 2. Change them to 0, 21, 41, 61 (steps of 20). 3. The ConnectServer then reads them as rooms of the servers.

    ✓ Konu sahibi tarafından onaylandıImperyus Games Brasil · 2010-12-14
  8. Sunucu kurulumu

    After about one hour of uptime nobody can log in: the login just keeps loading

    1. Set the server startup tool to reload (restart) the ConnectServer at an interval; the answer says this is done on all versions. 2. Restart the servers.

    ✓ Konu sahibi tarafından onaylandıDarksTeam · 2009-04-29
  9. Sunucu kurulumu

    All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"

    The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...

    ✓ Konu sahibi tarafından onaylandıDarksTeam · 2009-05-24
  10. Sunucu kurulumu

    GameServer starts normally but crashes after a few minutes

    1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....

    ✓ Konu sahibi tarafından onaylandıDarksTeam · 2011-05-11
  11. Sunucu kurulumuS2

    Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files

    The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...

    ✓ Konu sahibi tarafından onaylandıDarksTeam · 2015-02-13
  12. Sunucu kurulumuIGCNS9

    IGCN S9 E2 repack: 'No active Game Servers found' and disconnect when the server settings use a DDNS hostname

    1. Put the real (numeric) IP address in the GameServer and server list settings instead of the DDNS hostname. 2. Restart the ConnectServer and GameServer and connect again. 3. If you must...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2018-12-29
  13. Sunucu kurulumuMuEmu / Louis0.97k

    MuEmu 0.97k (kayito): how do I make a second server show up in its own box ("Server 2") on the server selection screen?

    1. The selection screen groups GameServers by ServerCode, 20 codes per box. 2. ServerCode 0 to 19 appear under Server 1, 20 to 39 under Server 2, 40 to 59 under Server 3, and so on. 3. Gi...

    ✓ Sorun kaydında onaylandıGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-12-04
  14. Sunucu kurulumuMuEmu / LouisS6

    MSVCP100.DLL is missing when starting ConnectServer, DataServer or JoinServer (MuEmu S6 files).

    Install the Microsoft Visual C++ 2010 Redistributable (x86, plus x64 on 64 bit Windows). Prefer the Microsoft download over single DLL sites.

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2018-06-11
  15. Sunucu kurulumuSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Konu sahibi tarafından onaylandıTUServerMU · 2023-09-16
  16. Sunucu kurulumuclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Konu sahibi tarafından onaylandıImperyus Games Brasil · 2009-10-30
  17. Sunucu kurulumuS2

    Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails

    1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...

    ✓ Konu sahibi tarafından onaylandıRaGEZONE · 2018-10-25
  18. Sunucu kurulumuOpenMUany

    OpenMU local server without internet fails with "Could not start the server listeners: Name does not resolve (api.ipify.org:443)".

    1. The default Public IP resolver asks api.ipify.org for your public IP, which fails offline. 2. For local play, open the admin panel, game configuration, System. 3. Set the IP resolve se...

    ✓ Sorun kaydında onaylandıGitHub (MUnique/OpenMU) · 2023-11-16
  19. Sunucu kurulumuMuEmu / LouisS8

    Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.

    1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...

    ✓ Konu sahibi tarafından onaylandıTuServerMU · 2020-06-17
  20. Sunucu kurulumuOpenMUS6

    OpenMU in Docker on Windows: the client sees the server list but is disconnected when joining a server.

    1. Use the client version the server targets (1.04d English, Season 6 E3). 2. Open the ports in the Windows firewall (and allow NAT edge traversal). 3. The connect server hands out the IP...

    ✓ Sorun kaydında onaylandıGitHub (MUnique/OpenMU) · 2019-11-12

MUTube videoları

“connectserver” için daha fazla video

Hâlâ takıldınız mı? MU Asistanı'na sor MuGPS'te ara

MuADMINS Community Alpha: ücretsiz, topluluk tarafından yapılıyor, aktif geliştirmede.