Community AlphaAlpha MUADMINS
PTPortuguês (Brasil)
Entrar
No MuADMINSConfig ScannerEnvie o zip dos seus arquivos: rates, drops, spots, limitesAbrirNo MuADMINSEncontre-nos no DiscordPeça ajuda, mostre o que está criando e converse sobre MU com outros donos de servidores.Abrir

MuADMINS

Soluções

Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.

63 soluções para “game server does not start” em Configuração do servidor · Limpar

  1. Configuração do servidorMSPro

    MSPro: GameServer does not open after a VPS restart or a move to a new VPS, and no error is shown

    The MSPro license is bound to the machine's HWID. A new VPS, or some VPS restarts, changes the HWID, and then the GameServer does not open and shows no error. 1. Request or regenerate the...

    ✓ Confirmado pelo autor do tópicoEscrito pelo MuADMINS · 2026-10-31
  2. Configuração do servidor

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2009-11-04
  3. Configuração do servidor97d+99i

    GameServer error at start with DarkMaster 97d+99i Beta 13 files, fixed by turning off the EventChip server connection

    1. Open Data\commonserver.cfg. 2. Find EventChipServerConnect = 1 and change it to EventChipServerConnect = 0. 3. Restart the GameServer.

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2011-04-23
  4. Configuração do servidor

    GameServer starts normally but crashes after a few minutes

    1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2011-05-11
  5. Configuração do servidorX-TeamSeason 15

    X-Team Season 15 files (update 5): GameServer shows a message that something 'does not exist' and will not start

    The error is about the server code and the GameServer common file of the update. 1. Check the ServerCode is the same in ConnectServer\ConnectServer.txt, Data\MapServerInfo and the GameSer...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-08-15
  6. Configuração do servidorMuEmu / LouisSeason 6

    Legion Team (Rodrigo117) files: GameServerCS shows an error at start while the normal GameServer runs

    The common config of the GameServers was incomplete, so the normal GameServer and GameServerCS tried to use the same (wrong) port. 1. Open the common config file of each GameServer (norma...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-08-06
  7. Configuração do servidor0.97d

    Aminyuz 97d files: GameServer gives a conexion.ini connection error at start although all IPs are right (EventServer and Ranking open fine)

    The SQL login in the Aminyuz connection file was wrong. 1. Open C:\MuServer\Aminyuz\Conexion (the connection ini of these files). 2. In the [SQL] block set Usuario = sa (your SQL user), C...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-02-21
  8. Configuração do servidorS2

    Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails

    1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-10-25
  9. Configuração do servidorMuEmu / LouisS6

    MuEmu (compiled from source, antihack on): players are disconnected when moving to Crywolf and other GameServerCS maps, even with the CS port (55919) open.

    1. Open GameServer - Common of the GameServer(s). 2. Add the missing CustomerName and CustomerHardwareId lines (needed after compiling with the antihack enabled). 3. Restart GameServer an...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2019-01-02
  10. Configuração do servidorany

    My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?

    1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...

    Reescrita da fonte pelo MuADMINSNot verifiedMicrosoft Learn · 2026-02-12
  11. Configuração do servidorOpenMUany

    OpenMU in Docker: game servers keep reporting my public IP to the client and -resolveIP / RESOLVE_IP seem ignored. How do I set loopback or local?

    1. Open the admin panel and go to the game configuration, System section. 2. Change the IP Resolving setting (Public by default) to Loopback for same machine tests, Local for a LAN, or Cu...

    ✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2026-02-13
  12. Configuração do servidorany

    GameServer, DataServer or JoinServer will not start: MSVCR100.dll, MSVCP120.dll or VCRUNTIME140.dll is missing. Which runtime do I install?

    1. The number in the DLL name tells the Visual C++ version: 80 = 2005, 90 = 2008, 100 = 2010, 110 = 2012, 120 = 2013, 140 = 2015 to 2026. 2. Download the matching Visual C++ Redistributab...

    Reescrita da fonte pelo MuADMINSNot verifiedMicrosoft Learn · 2025-12-03
  13. Configuração do servidorMuEmu / LouisS6

    Louis S6 Up13 GameServer window never opens, shows an error and fills the folder with .dmp files after editing configs.

    1. Restore the original Data folder; if the server starts, the bad file is in there. 2. Put your edited files back one by one, starting with the ones you changed, until it fails again. 3....

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2021-10-11
  14. Configuração do servidorOpenMUany

    OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?

    1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...

    Reescrita da fonte pelo MuADMINSNot verifiedGitHub (MUnique/OpenMU docs) · 2026-10-11
  15. Configuração do servidorS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2008-06-03
  16. Configuração do servidor99b

    GameServer.exe loads for a long time and then Windows shows "Send error report / Don't Send" with every server pack

    The PC was infected with the Win32.Parite (A to C) file infector, which damages .exe files. 1. Download a Parite removal tool (the thread used AntiParite) and let it scan the processes. 2...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2008-06-19
  17. Configuração do servidor0.96 / 0.97

    GameServer error "error-L3 : Monster Level Overflow" and players get disconnected (0.96/0.97 era files)

    A monster in the monster list has a level above the limit of the GameServer (149 or 254 depending on the files). 1. Open the monster list (Monster.txt) and look for monsters with a very h...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2024-03-11
  18. Configuração do servidor0.97d

    97d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct

    The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2021-02-08
  19. Configuração do servidorMuEmu / LouisSeason 6

    MuEmu S6 with a normal and a VIP server: going from the VIP server to a GameServerCS map and back sends the player to the normal server

    The return server for each map is set in MapServerInfo, and it has to be set in both servers. 1. Open Data\MapServerInfo (MapServerMove section: ServerCode NotMoveOption NextMap NextServe...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-09-25
  20. Configuração do servidorIGCNS9

    IGCN Season 9 repack: GameServerCS shows an error when Castle Siege is configured, even with correct settings.

    1. The SQL Server language caused it. 2. Install SQL Server in English (English instance) and restore the databases there. 3. Start GameServerCS again.

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2017-06-18
Ainda com problema? Pergunte ao Assistente MU Buscar no MuGPS Buscar no MUTube

MuADMINS Community Alpha: grátis, feito pela comunidade e em desenvolvimento ativo.