Community AlphaAlpha MUADMINS
PTPortuguês (Brasil)
Entrar
No MuADMINSConfig ScannerEnvie o zip dos seus arquivos: rates, drops, spots, limitesAbrirNo MuADMINSEncontre-nos no DiscordPeça ajuda, mostre o que está criando e converse sobre MU com outros donos de servidores.Abrir

MuADMINS

Soluções

Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.

30 soluções para “fails to start” em Configuração do servidor · Limpar

  1. Configuração do servidor

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2009-11-04
  2. Configuração do servidorS2

    Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails

    1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-10-25
  3. Configuração do servidorOpenMUany

    OpenMU crashes on startup after a failed data import left the database tables without a GameConfiguration.

    1. Older builds crashed when the tables existed but no GameConfiguration row did. 2. Update to a build containing PR #910 (September 2026): the server then starts and the admin panel offe...

    ✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2026-08-27
  4. Configuração do servidorS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2008-06-03
  5. Configuração do servidorOpenMUany

    OpenMU local server without internet fails with "Could not start the server listeners: Name does not resolve (api.ipify.org:443)".

    1. The default Public IP resolver asks api.ipify.org for your public IP, which fails offline. 2. For local play, open the admin panel, game configuration, System. 3. Set the IP resolve se...

    ✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2023-11-16
  6. Configuração do servidorOpenMUany

    OpenMU starts with -demo but -reinit fails: Postgres says column ExcellentItemDropLevelDelta of GameConfiguration does not exist.

    1. Two recent EF migrations were not picked up during a Postgres reinit, so the table was created without the new column. 2. Update your OpenMU checkout or image to a build that contains...

    ✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2026-04-11
  7. Configuração do servidorMuEmu / LouisSeason 6 (Louis)

    JoinServer and DataServer show "[SocketManager] WSAAccept() failed with error: 10061" on start.

    1. Check DataServerAddress in common.dat. 2. Leave it at the default 127.0.0.1, it does not need your public IP. 3. Start the servers again.

    ✓ Confirmado pelo autor do tópicoCreandoMU · 2022-02-21
  8. Configuração do servidorIGCNS9

    IGCN S9 E2 repack: DataServer says 'Login failed for user ...' (SQLSTATE 28000) and 'DATA SERVER CANNOT CONNECT TO MSSQL'

    1. The repack DataServer config came with a SQL login that does not exist on your SQL Server (here a random name like D2a78Rtko0), so the login fails. 2. Open the database settings of the...

    ✓ Confirmado pelo autor do tópicoRaGEZONE · 2019-07-14
  9. Configuração do servidorIGCN

    IGCN License Manager: what the GameServer license errors mean (Cannot connect to Auth Server, Time Check Failed, IP Address or HWID not found, Activation Time is over)

    1. Cannot connect to Auth Server (first connect) or Failed to connect to any of auth servers (reconnect): check that the subscription is active, that the IPs in the license data on the Li...

    Reescrita da fonte pelo MuADMINSNot verifiedIGCN · 2022-03-28
  10. Configuração do servidor0.97d

    97d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct

    The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2021-02-08
  11. Configuração do servidorany

    My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?

    1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...

    Reescrita da fonte pelo MuADMINSNot verifiedMicrosoft Learn · 2026-02-12
  12. Configuração do servidorOpenMUSeason 6 (OpenMU 0.8.x)

    OpenMU (Docker all-in-one) after updating the server: the client stays on the login screen after entering the password.

    1. Open the admin panel and run every pending update; the maintainer notes you cannot enter the game without them. 2. In this case the database upgrade had not completed, and an old impor...

    ✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2024-07-21
  13. Configuração do servidorOpenMU

    OpenMu Client Babylon installer: 'Port 80 is taken by ...', OpenMU did not start in time, or HTTPS does not work

    1. *Port 80 is taken by ...*: another web server (Apache, nginx, an old Caddy) holds the port. Stop it and run the installer again. 2. Build failed: read the log path it prints (/etc/mu-s...

    Reescrita da fonte pelo MuADMINSNot verifiedGitHub (Ignies/OpenMu-Client-Babylon) · 2026-10-17
  14. Configuração do servidor

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Confirmado pelo autor do tópicoDarksTeam · 2010-12-21
  15. Configuração do servidorany

    SQL Server 2012 installed without errors but SQL Server Agent will not start (Browser starts fine) when preparing MU files. What fixed it?

    1. In services.msc set SQL Server Agent to Automatic and try to start it. 2. If it still fails, the instance was installed with the wrong authentication choice. 3. Reinstall SQL Server an...

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2018-11-19
  16. Configuração do servidorMSPro

    Restoring the MuOnline database fails in SQL Server 2022 (MSPro v17 files)

    1. In SQL Server Management Studio right click Databases > Restore Database, choose Device and pick the .bak file that came with the files. 2. Open the Options page. 3. Tick "Overwrite th...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2026-09-27
  17. Configuração do servidorMuEmu / LouisS6

    KoshGames S6.3 files (MuEmu base): any small edit to InvasionManager makes the GameServers fail as if the file were broken.

    1. Windows Notepad was corrupting the file when saving. 2. Edit the config with Notepad++ or Sublime Text, keeping the original encoding. 3. Save and restart the GameServers.

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2021-02-06
  18. Configuração do servidorany

    Mu Hack Protection (Rodrigo117): the MHP logo shows, but after it closes main.exe never opens

    The protection was packed with the wrong plugin DLL. 1. Open your MHP packaging setup and check the plugin list. 2. Remove any DLL that is not one of your client plugins; the asker had ad...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-08-06
  19. Configuração do servidorMuEmu / LouisSeason 6 Episode 3

    Creating a character fails with 'Nombre de personaje incorrecto o ya existe' after installing a SQL script that gives points and zen to new characters (MuEmu S6 EP3 Louis Update 13)

    The new character script wrote to columns that do not exist in this database. 1. Open the script (trigger) you added in SQL Server Management Studio. 2. Compare its column names with your...

    ✓ Confirmado pelo autor do tópicoTUServerMU · 2020-05-04
  20. Configuração do servidorMuEmu / LouisS6

    Louis S6 Up13 GameServer window never opens, shows an error and fills the folder with .dmp files after editing configs.

    1. Restore the original Data folder; if the server starts, the bad file is in there. 2. Put your edited files back one by one, starting with the ones you changed, until it fails again. 3....

    ✓ Confirmado pelo autor do tópicoTuServerMU · 2021-10-11
Ainda com problema? Pergunte ao Assistente MU Buscar no MuGPS Buscar no MUTube

MuADMINS Community Alpha: grátis, feito pela comunidade e em desenvolvimento ativo.