MuADMINS
Soluções
Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.
64 soluções para “config” em Configuração do servidor · Limpar
IGCN S9 E2 repack: IGC tools do not run and the client disconnects with 127.0.0.1 in the configs
1. Do not use 127.0.0.1 in the server IP settings of this repack. 2. Open CMD, run ipconfig and take your IPv4 address. 3. Put that IPv4 address in every server IP setting (and in the cli...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2019-06-11Louis S6 Up13 GameServer window never opens, shows an error and fills the folder with .dmp files after editing configs.
1. Restore the original Data folder; if the server starts, the bad file is in there. 2. Put your edited files back one by one, starting with the ones you changed, until it fails again. 3....
✓ Confirmado pelo autor do tópicoTuServerMU · 2021-10-11OpenMU in Docker: how do I back up and restore the PostgreSQL database, and fix 'permission denied for schema config' after a restore?
1. The openmu-db-backup container of nolt/openmu-docker runs pg_dump -Fc every BACKUP_INTERVAL seconds (default 86400), checks the dump and keeps gzipped files in ./backups/ for RETENTION...
MuEmu (Louis) files: where do I enter the SQL user and password? I cannot find it in any server config
MuEmu servers do not keep the SQL login in their config files: JoinServer and DataServer reach the database through ODBC. 1. Run the ODBC .reg file that comes with the files, or create th...
✓ Confirmado pelo autor do tópicoTUServerMU · 2020-07-12OpenMU crashes on startup after a failed data import left the database tables without a GameConfiguration.
1. Older builds crashed when the tables existed but no GameConfiguration row did. 2. Update to a build containing PR #910 (September 2026): the server then starts and the admin panel offe...
✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2026-08-27OpenMU: after a restart all my configuration and data were gone and the database was initialized again.
1. With Docker the Postgres data must live in a volume. 2. The provided docker-compose files persist it in volumes, so the data was lost because the volumes were deleted or the setup did...
✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2023-11-11Event server (Devil Square ranking) error: it looks for the wrong database
1. Open the event server config svconfig.ini. 2. Change mu2003_dsn = Ranking to mu2003_dsn = MuOnline (the data source that really exists). 3. Restart the event server.
✓ Confirmado pelo autor do tópicoDarksTeam · 2009-10-08How to change the ConnectServer port 44405, and login fails after changing it
1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...
✓ Confirmado pelo autor do tópicoDarksTeam · 2010-12-21Disconnect when entering my own server behind a router, although it worked before (after a Windows startup problem)
The PC got a different local IPv4 address, so the router's DMZ still pointed to the old one. 1. Open cmd and run ipconfig /all; note the IPv4 address. 2. In the router, set the DMZ (or th...
✓ Confirmado pelo autor do tópicoDarksTeam · 2012-04-30DarksTeam 97d+99i moved to a VPS (Windows Server 2012 R2, SQL 2008 R2): RankingServer shows an error although the config did not change
The VPS firewall was blocking the RankingServer connections. 1. In Windows Firewall (and the VPS provider firewall, if any) allow the RankingServer program, or open the port it uses, for...
✓ Confirmado pelo autor do tópicoTUServerMU · 2020-07-08MuEmu source: how to make the quit / switch character / switch server countdown length configurable
The topic starter posted this fix (credited to Emershow): 1. ServerInfo.cpp: below SetItemAcceptHarmonySwitch add this->m_CharacterCloseCount = GetPrivateProfileInt(section,"CharacterClos...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2023-10-31OpenMU starts with -demo but -reinit fails: Postgres says column ExcellentItemDropLevelDelta of GameConfiguration does not exist.
1. Two recent EF migrations were not picked up during a Postgres reinit, so the table was created without the new column. 2. Update your OpenMU checkout or image to a build that contains...
✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2026-04-11IGCN Season 9 repack: GameServerCS shows an error when Castle Siege is configured, even with correct settings.
1. The SQL Server language caused it. 2. Install SQL Server in English (English instance) and restore the databases there. 3. Start GameServerCS again.
✓ Confirmado pelo autor do tópicoTuServerMU · 2017-06-18Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list
1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2024-12-10OpenMU: a player stays 'already connected' after a dropped connection and cannot log in again, even with the right password
1. The old session stays registered while the TCP connection to OpenMU is still open. With the web client the WebSocket proxy keeps that connection alive, so every new login gets AccountA...
✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2026-10-07OpenMU Docker server goes to 100% CPU after about two weeks (a kdevtmpfsi style crypto miner).
1. The maintainer found the way in: the Postgres port was exposed to the internet in the Traefik deployment (fixed in PR #435, July 2024). 2. Use the current deploy files, never publish p...
✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2024-07-17"login server connect fail" when the server starts the GameServer
The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...
✓ Confirmado pelo autor do tópicoDarksTeam · 2009-11-04Players are disconnected from the game about one minute after entering
The anti-hack options in the GameServer config kick legit players. 1. Open MuServer\Data\commonserver.cfg and find SpeedHackPlayerBlock. 2. Set the anti-hack block like the working values...
✓ Confirmado pelo autor do tópicoDarksTeam · 2011-01-25Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files
The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...
✓ Confirmado pelo autor do tópicoDarksTeam · 2015-02-13After changing the client name in the main info and replacing Main.premium, the login box (ID and password) no longer appears (files with MHP)
The Mu Hack Protection server config still had the old customer name. 1. Open C:\MuServer\MHPServer\MHPServer.ini and set CustomerName to the new name, with the right ClientVersion and Cl...
✓ Confirmado pelo autor do tópicoTUServerMU · 2021-03-27
Vídeos no MUTube
QUAL SERVIDOR DE MU ONLINE JOGAR EM 2026?
STRON · 6:09 · 2026
Criando Servidor de MuOnline no Win7- Instalando SQL Server.
Jacksonds · 5:51 · 2010
Criando Servidor de MuOnline sem erro NO-IP Season 4
Help MuOnline · 23:26 · 2021
Ferramenta para refazer a Message txt MuOnline
GamesWTeam Solutions · 3:11 · 2024