MuADMINS
Solutions
Des correctifs courts pour les problèmes courants de serveur, de client et de site web MU Online, chacun avec sa source et sa date. “Confirmé” signifie que la personne qui a posé la question a indiqué que le correctif a fonctionné.
63 solutions pour “game server does not start” dans Installation du serveur · Effacer
MSPro: GameServer does not open after a VPS restart or a move to a new VPS, and no error is shown
The MSPro license is bound to the machine's HWID. A new VPS, or some VPS restarts, changes the HWID, and then the GameServer does not open and shows no error. 1. Request or regenerate the...
✓ Confirmé par l'auteur du sujetRédigé par MuADMINS · 2026-10-31"login server connect fail" when the server starts the GameServer
The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...
✓ Confirmé par l'auteur du sujetDarksTeam · 2009-11-04GameServer error at start with DarkMaster 97d+99i Beta 13 files, fixed by turning off the EventChip server connection
1. Open Data\commonserver.cfg. 2. Find EventChipServerConnect = 1 and change it to EventChipServerConnect = 0. 3. Restart the GameServer.
✓ Confirmé par l'auteur du sujetDarksTeam · 2011-04-23GameServer starts normally but crashes after a few minutes
1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....
✓ Confirmé par l'auteur du sujetDarksTeam · 2011-05-11X-Team Season 15 files (update 5): GameServer shows a message that something 'does not exist' and will not start
The error is about the server code and the GameServer common file of the update. 1. Check the ServerCode is the same in ConnectServer\ConnectServer.txt, Data\MapServerInfo and the GameSer...
✓ Confirmé par l'auteur du sujetTUServerMU · 2020-08-15Legion Team (Rodrigo117) files: GameServerCS shows an error at start while the normal GameServer runs
The common config of the GameServers was incomplete, so the normal GameServer and GameServerCS tried to use the same (wrong) port. 1. Open the common config file of each GameServer (norma...
✓ Confirmé par l'auteur du sujetTUServerMU · 2020-08-06Aminyuz 97d files: GameServer gives a conexion.ini connection error at start although all IPs are right (EventServer and Ranking open fine)
The SQL login in the Aminyuz connection file was wrong. 1. Open C:\MuServer\Aminyuz\Conexion (the connection ini of these files). 2. In the [SQL] block set Usuario = sa (your SQL user), C...
✓ Confirmé par l'auteur du sujetTUServerMU · 2020-02-21Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails
1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...
✓ Confirmé par l'auteur du sujetRaGEZONE · 2018-10-25MuEmu (compiled from source, antihack on): players are disconnected when moving to Crywolf and other GameServerCS maps, even with the CS port (55919) open.
1. Open GameServer - Common of the GameServer(s). 2. Add the missing CustomerName and CustomerHardwareId lines (needed after compiling with the antihack enabled). 3. Restart GameServer an...
✓ Confirmé par l'auteur du sujetTuServerMU · 2019-01-02My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?
1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...
OpenMU in Docker: game servers keep reporting my public IP to the client and -resolveIP / RESOLVE_IP seem ignored. How do I set loopback or local?
1. Open the admin panel and go to the game configuration, System section. 2. Change the IP Resolving setting (Public by default) to Loopback for same machine tests, Local for a LAN, or Cu...
✓ Confirmé dans l'issueGitHub (MUnique/OpenMU) · 2026-02-13GameServer, DataServer or JoinServer will not start: MSVCR100.dll, MSVCP120.dll or VCRUNTIME140.dll is missing. Which runtime do I install?
1. The number in the DLL name tells the Visual C++ version: 80 = 2005, 90 = 2008, 100 = 2010, 110 = 2012, 120 = 2013, 140 = 2015 to 2026. 2. Download the matching Visual C++ Redistributab...
Louis S6 Up13 GameServer window never opens, shows an error and fills the folder with .dmp files after editing configs.
1. Restore the original Data folder; if the server starts, the bad file is in there. 2. Put your edited files back one by one, starting with the ones you changed, until it fails again. 3....
✓ Confirmé par l'auteur du sujetTuServerMU · 2021-10-11OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?
1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...
GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)
The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...
✓ Confirmé par l'auteur du sujetDarksTeam · 2008-06-03GameServer.exe loads for a long time and then Windows shows "Send error report / Don't Send" with every server pack
The PC was infected with the Win32.Parite (A to C) file infector, which damages .exe files. 1. Download a Parite removal tool (the thread used AntiParite) and let it scan the processes. 2...
✓ Confirmé par l'auteur du sujetDarksTeam · 2008-06-19GameServer error "error-L3 : Monster Level Overflow" and players get disconnected (0.96/0.97 era files)
A monster in the monster list has a level above the limit of the GameServer (149 or 254 depending on the files). 1. Open the monster list (Monster.txt) and look for monsters with a very h...
✓ Confirmé par l'auteur du sujetDarksTeam · 2024-03-1197d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct
The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...
✓ Confirmé par l'auteur du sujetTUServerMU · 2021-02-08MuEmu S6 with a normal and a VIP server: going from the VIP server to a GameServerCS map and back sends the player to the normal server
The return server for each map is set in MapServerInfo, and it has to be set in both servers. 1. Open Data\MapServerInfo (MapServerMove section: ServerCode NotMoveOption NextMap NextServe...
✓ Confirmé par l'auteur du sujetTUServerMU · 2020-09-25IGCN Season 9 repack: GameServerCS shows an error when Castle Siege is configured, even with correct settings.
1. The SQL Server language caused it. 2. Install SQL Server in English (English instance) and restore the databases there. 3. Start GameServerCS again.
✓ Confirmé par l'auteur du sujetTuServerMU · 2017-06-18