Community AlphaAlpha MUADMINS
FRFrançais
Connexion
Sur MuADMINSConfig ScannerDéposez le zip de vos fichiers : rates, drops, spots, limitesOuvrirSur MuADMINSRetrouvez-nous sur DiscordDemandez de l'aide, partagez ce que vous créez et parlez de MU avec d'autres propriétaires de serveurs.Ouvrir

MuADMINS

Solutions

Des correctifs courts pour les problèmes courants de serveur, de client et de site web MU Online, chacun avec sa source et sa date. “Confirmé” signifie que la personne qui a posé la question a indiqué que le correctif a fonctionné.

40 solutions pour “ConnectServer” dans Installation du serveur · Effacer

  1. Installation du serveur

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Confirmé par l'auteur du sujetDarksTeam · 2010-12-21
  2. Installation du serveurAutres fichiers0.99b

    On a 0.99b server the ConnectServer closes by itself when I replace the numeric IP with a No-IP hostname. Why?

    1. Old 0.99b ConnectServer builds only accept an address as long as a numeric IP. 2. Keep the hostname at 14 characters or less including the dots (the length of a full IPv4 address strin...

    ✓ Confirmé par l'auteur du sujetTuServerMU · 2021-02-10
  3. Installation du serveurMuEmu / Louis0.97k

    ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?

    1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...

    Réécriture de la source par MuADMINSNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02
  4. Installation du serveurany

    ConnectServer and GameServer drop every few hours with WSASend error 10054 and protocol header errors once many players join.

    1. Check the real player limit of your files: these were built for 250 users, not 1000. 2. Above that number the server falls over. 3. Add a sub server (another GameServer) to spread play...

    ✓ Confirmé par l'auteur du sujetTuServerMU · 2021-05-30
  5. Installation du serveur

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Confirmé par l'auteur du sujetRaGEZONE · 2024-12-10
  6. Installation du serveurMuEmu / Louis0.97k (update 23)

    Kayito 0.97k update 23: Chinese server names in ServerList.dat show garbled, changing the file encoding does not help.

    1. Update 23 converts the text with IsEncodingAnsi in MemScript.cpp, which broke it. 2. The maintainer corrected it for the next release (update 24), so update to update 24 or later. 3. A...

    ✓ Confirmé dans l'issueGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-08-30
  7. Installation du serveurclassic

    How do I show sub servers grouped under one server in the list?

    1. In Connectserverlist.dat the codes are 0, 1, 2... 2. Change them to 0, 21, 41, 61 (steps of 20). 3. The ConnectServer then reads them as rooms of the servers.

    ✓ Confirmé par l'auteur du sujetImperyus Games Brasil · 2010-12-14
  8. Installation du serveur

    After about one hour of uptime nobody can log in: the login just keeps loading

    1. Set the server startup tool to reload (restart) the ConnectServer at an interval; the answer says this is done on all versions. 2. Restart the servers.

    ✓ Confirmé par l'auteur du sujetDarksTeam · 2009-04-29
  9. Installation du serveur

    All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"

    The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...

    ✓ Confirmé par l'auteur du sujetDarksTeam · 2009-05-24
  10. Installation du serveur

    GameServer starts normally but crashes after a few minutes

    1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....

    ✓ Confirmé par l'auteur du sujetDarksTeam · 2011-05-11
  11. Installation du serveurS2

    Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files

    The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...

    ✓ Confirmé par l'auteur du sujetDarksTeam · 2015-02-13
  12. Installation du serveurIGCNS9

    IGCN S9 E2 repack: 'No active Game Servers found' and disconnect when the server settings use a DDNS hostname

    1. Put the real (numeric) IP address in the GameServer and server list settings instead of the DDNS hostname. 2. Restart the ConnectServer and GameServer and connect again. 3. If you must...

    ✓ Confirmé par l'auteur du sujetRaGEZONE · 2018-12-29
  13. Installation du serveurMuEmu / Louis0.97k

    MuEmu 0.97k (kayito): how do I make a second server show up in its own box ("Server 2") on the server selection screen?

    1. The selection screen groups GameServers by ServerCode, 20 codes per box. 2. ServerCode 0 to 19 appear under Server 1, 20 to 39 under Server 2, 40 to 59 under Server 3, and so on. 3. Gi...

    ✓ Confirmé dans l'issueGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-12-04
  14. Installation du serveurMuEmu / LouisS6

    MSVCP100.DLL is missing when starting ConnectServer, DataServer or JoinServer (MuEmu S6 files).

    Install the Microsoft Visual C++ 2010 Redistributable (x86, plus x64 on 64 bit Windows). Prefer the Microsoft download over single DLL sites.

    ✓ Confirmé par l'auteur du sujetTuServerMU · 2018-06-11
  15. Installation du serveurSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Confirmé par l'auteur du sujetTUServerMU · 2023-09-16
  16. Installation du serveurclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Confirmé par l'auteur du sujetImperyus Games Brasil · 2009-10-30
  17. Installation du serveurS2

    Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails

    1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...

    ✓ Confirmé par l'auteur du sujetRaGEZONE · 2018-10-25
  18. Installation du serveurOpenMUany

    OpenMU local server without internet fails with "Could not start the server listeners: Name does not resolve (api.ipify.org:443)".

    1. The default Public IP resolver asks api.ipify.org for your public IP, which fails offline. 2. For local play, open the admin panel, game configuration, System. 3. Set the IP resolve se...

    ✓ Confirmé dans l'issueGitHub (MUnique/OpenMU) · 2023-11-16
  19. Installation du serveurMuEmu / LouisS8

    Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.

    1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...

    ✓ Confirmé par l'auteur du sujetTuServerMU · 2020-06-17
  20. Installation du serveurOpenMUS6

    OpenMU in Docker on Windows: the client sees the server list but is disconnected when joining a server.

    1. Use the client version the server targets (1.04d English, Season 6 E3). 2. Open the ports in the Windows firewall (and allow NAT edge traversal). 3. The connect server hands out the IP...

    ✓ Confirmé dans l'issueGitHub (MUnique/OpenMU) · 2019-11-12

Vidéos sur MUTube

Plus de vidéos pour « ConnectServer »

Toujours bloqué ? Demander à l'Assistant MU Rechercher sur MuGPS

MuADMINS Community Alpha : gratuit, fait par la communauté, en développement actif.