Community AlphaAlpha MUADMINS
FILFilipino
Mag-sign in
Sa MuADMINSConfig ScannerI-upload ang zip ng mga file mo: rate, drop, spot, limitBuksanSa MuADMINSMakipagkita sa amin sa DiscordHumingi ng tulong, ibahagi ang ginagawa mo at makipag-usap tungkol sa MU sa ibang may-ari ng server.Buksan

MuADMINS

Mga Solusyon

Maiikling fix para sa mga karaniwang problema sa MU Online server, client at website, bawat isa ay may source at petsa. Ang ibig sabihin ng “Kinumpirma” ay sinabi ng nagtanong na gumana ang fix.

28 solusyon para sa “local” sa Server setup · I-clear

  1. Server setupOpenMUany

    OpenMU local server without internet fails with "Could not start the server listeners: Name does not resolve (api.ipify.org:443)".

    1. The default Public IP resolver asks api.ipify.org for your public IP, which fails offline. 2. For local play, open the admin panel, game configuration, System. 3. Set the IP resolve se...

    ✓ Kinumpirma sa issueGitHub (MUnique/OpenMU) · 2023-11-16
  2. Server setupOpenMUany

    OpenMU in Docker: game servers keep reporting my public IP to the client and -resolveIP / RESOLVE_IP seem ignored. How do I set loopback or local?

    1. Open the admin panel and go to the game configuration, System section. 2. Change the IP Resolving setting (Public by default) to Loopback for same machine tests, Local for a LAN, or Cu...

    ✓ Kinumpirma sa issueGitHub (MUnique/OpenMU) · 2026-02-13
  3. Server setup

    All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"

    The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...

    ✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2009-05-24
  4. Server setup

    Disconnect when entering my own server behind a router, although it worked before (after a Windows startup problem)

    The PC got a different local IPv4 address, so the router's DMZ still pointed to the old one. 1. Open cmd and run ipconfig /all; note the IPv4 address. 2. In the router, set the DMZ (or th...

    ✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2012-04-30
  5. Server setupIGCNS12

    IGCN Season 12: DataServer is not responding although TCP/IP is enabled in SQL Server

    1. Open DataServer.ini and check SQLServerName. 2. When SQL Server runs on the same machine use SQLServerName = (local) or the exact PC name as shown in SQL Server Management Studio (for...

    ✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2020-01-08
  6. Server setupany

    After enabling TCP/IP in SQL Server for the web, DataServer, JoinServer and GameServerCS lost the database connection. How was it fixed?

    1. In SQL Server Configuration Manager keep Named Pipes and TCP/IP enabled for the instance. 2. Open the ODBC DSNs used by the server files. 3. Change the Server field from the LAN IP to...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2020-05-23
  7. Server setupMuEmu / LouisS4

    Louis S4 (TSM FirePremium) local server worked for one day, then shows SQL connection errors.

    1. Create the ODBC data sources by hand in the ODBC administrator (instead of the .reg file). 2. Point them to the right SQL server and database and restart the servers.

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2018-06-11
  8. Server setupIGCNS9

    IGC DataServer stays on its loading window and never finishes starting.

    1. Check the ODBC/SQL settings of the DataServer. 2. The SQL instance name was wrong. When SQL Server is on the same PC use (local) as the instance/host. 3. Start the DataServer again.

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2017-04-21
  9. Server setupIGCN

    IGCN License Manager: how to activate the server license again without changing the license data (Clear Activation)

    1. Check that you still have a license change available (the free allowance or a bought license change service). 2. On the License Manager page open the dropdown of that license and choos...

    Muling isinulat ng MuADMINS mula sa sourceNot verifiedIGCN · 2024-10-30
  10. Server setup

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2009-11-04
  11. Server setup0.97d

    97d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct

    The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...

    ✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2021-02-08
  12. Server setupany

    JoinServer and DataServer show Could not connect to database on start.

    1. Restore the MuOnline database correctly in SQL Server (from the backup shipped with your files). 2. Create the ODBC data source the servers expect, pointing to that database. 3. Make s...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2017-07-05
  13. Server setupMuEmu / LouisS6

    MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?

    1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2018-11-16
  14. Server setupany

    I run one server on my VPS and want a second one with its own database on the same VPS, but it does not connect. What must change?

    1. Give the second server its own database and create a new ODBC data source pointing to it (same driver, Server = (local), Database = new name). 2. Point the second JoinServer and DataSe...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2019-10-09
  15. Server setupMuEmu / LouisS6

    Friends can join my MuEmu S6 server from outside, but I cannot connect from another PC in the same LAN as the server. Which port is missing?

    1. It is usually not a port: many routers do not let LAN PCs reach their own public IP (no NAT loopback). 2. Use a No-IP hostname as the server address in the ConnectServer server list, m...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2020-07-14
  16. Server setupany

    Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?

    1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2019-05-03
  17. Server setupMuEmu / LouisS4

    MuEmu S4: the server and MuMaker do not see the databases on SQL Server 2008 R2 even with remote connections and TCP/IP enabled.

    1. Check how SQL Server was installed: it had been set up as a named instance. 2. The files and MuMaker expect the default instance, reached as (local) or the PC name. 3. Reinstall SQL Se...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2017-11-11
  18. Server setupMuEmu / LouisS6

    MuEmu S6 (KoshGames/Louis) on SQL Server Express 2012: JoinServer says "Could not connect to database" although MuOnline is restored and the .reg files were run.

    1. SQL Express installs a named instance, usually SQLEXPRESS, so (local) alone does not reach it. 2. Open the ODBC admin for your Windows bits and create the DSNs by hand. 3. In the serve...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2020-08-08
  19. Server setupIbang filesS2

    Season 2 files on SQL Server 2000: after creating the MuOnline database with the query, DataServer shows a database error. What was wrong?

    1. Run the database creation query in Query Analyzer logged in as sa, without selecting another database first. 2. Check the ODBC admin: the files' ODBC.reg had created the entries under...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2017-03-23
  20. Server setupWebZen 97d / 99b97d

    SQL 2000 will not install on Windows 7, so how do I run DarksTeam 97d files on SQL Server 2008 R2 instead?

    1. Install SQL Server 2008 R2 and set a password for sa during setup (do not skip it). 2. Restore the MuOnline database from the files. 3. Open the ODBC admin (32-bit one on 64-bit Window...

    ✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2018-08-06

Mga video sa MUTube

Iba pang video para sa “local”

Naipit pa rin? Magtanong sa MU Assistant Maghanap sa MuGPS

MuADMINS Community Alpha: libre, gawa ng komunidad, at patuloy na dine-develop.