MuADMINS
Mga Solusyon
Maiikling fix para sa mga karaniwang problema sa MU Online server, client at website, bawat isa ay may source at petsa. Ang ibig sabihin ng “Kinumpirma” ay sinabi ng nagtanong na gumana ang fix.
64 solusyon para sa “config” sa Server setup · I-clear
IGCN S9 E2 repack: IGC tools do not run and the client disconnects with 127.0.0.1 in the configs
1. Do not use 127.0.0.1 in the server IP settings of this repack. 2. Open CMD, run ipconfig and take your IPv4 address. 3. Put that IPv4 address in every server IP setting (and in the cli...
✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2019-06-11Louis S6 Up13 GameServer window never opens, shows an error and fills the folder with .dmp files after editing configs.
1. Restore the original Data folder; if the server starts, the bad file is in there. 2. Put your edited files back one by one, starting with the ones you changed, until it fails again. 3....
✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2021-10-11OpenMU in Docker: how do I back up and restore the PostgreSQL database, and fix 'permission denied for schema config' after a restore?
1. The openmu-db-backup container of nolt/openmu-docker runs pg_dump -Fc every BACKUP_INTERVAL seconds (default 86400), checks the dump and keeps gzipped files in ./backups/ for RETENTION...
MuEmu (Louis) files: where do I enter the SQL user and password? I cannot find it in any server config
MuEmu servers do not keep the SQL login in their config files: JoinServer and DataServer reach the database through ODBC. 1. Run the ODBC .reg file that comes with the files, or create th...
✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2020-07-12OpenMU crashes on startup after a failed data import left the database tables without a GameConfiguration.
1. Older builds crashed when the tables existed but no GameConfiguration row did. 2. Update to a build containing PR #910 (September 2026): the server then starts and the admin panel offe...
✓ Kinumpirma sa issueGitHub (MUnique/OpenMU) · 2026-08-27OpenMU: after a restart all my configuration and data were gone and the database was initialized again.
1. With Docker the Postgres data must live in a volume. 2. The provided docker-compose files persist it in volumes, so the data was lost because the volumes were deleted or the setup did...
✓ Kinumpirma sa issueGitHub (MUnique/OpenMU) · 2023-11-11Event server (Devil Square ranking) error: it looks for the wrong database
1. Open the event server config svconfig.ini. 2. Change mu2003_dsn = Ranking to mu2003_dsn = MuOnline (the data source that really exists). 3. Restart the event server.
✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2009-10-08How to change the ConnectServer port 44405, and login fails after changing it
1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...
✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2010-12-21Disconnect when entering my own server behind a router, although it worked before (after a Windows startup problem)
The PC got a different local IPv4 address, so the router's DMZ still pointed to the old one. 1. Open cmd and run ipconfig /all; note the IPv4 address. 2. In the router, set the DMZ (or th...
✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2012-04-30DarksTeam 97d+99i moved to a VPS (Windows Server 2012 R2, SQL 2008 R2): RankingServer shows an error although the config did not change
The VPS firewall was blocking the RankingServer connections. 1. In Windows Firewall (and the VPS provider firewall, if any) allow the RankingServer program, or open the port it uses, for...
✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2020-07-08MuEmu source: how to make the quit / switch character / switch server countdown length configurable
The topic starter posted this fix (credited to Emershow): 1. ServerInfo.cpp: below SetItemAcceptHarmonySwitch add this->m_CharacterCloseCount = GetPrivateProfileInt(section,"CharacterClos...
✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2023-10-31OpenMU starts with -demo but -reinit fails: Postgres says column ExcellentItemDropLevelDelta of GameConfiguration does not exist.
1. Two recent EF migrations were not picked up during a Postgres reinit, so the table was created without the new column. 2. Update your OpenMU checkout or image to a build that contains...
✓ Kinumpirma sa issueGitHub (MUnique/OpenMU) · 2026-04-11IGCN Season 9 repack: GameServerCS shows an error when Castle Siege is configured, even with correct settings.
1. The SQL Server language caused it. 2. Install SQL Server in English (English instance) and restore the databases there. 3. Start GameServerCS again.
✓ Kinumpirma ng nagsimula ng topicTuServerMU · 2017-06-18Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list
1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...
✓ Kinumpirma ng nagsimula ng topicRaGEZONE · 2024-12-10OpenMU: a player stays 'already connected' after a dropped connection and cannot log in again, even with the right password
1. The old session stays registered while the TCP connection to OpenMU is still open. With the web client the WebSocket proxy keeps that connection alive, so every new login gets AccountA...
✓ Kinumpirma sa issueGitHub (MUnique/OpenMU) · 2026-10-07OpenMU Docker server goes to 100% CPU after about two weeks (a kdevtmpfsi style crypto miner).
1. The maintainer found the way in: the Postgres port was exposed to the internet in the Traefik deployment (fixed in PR #435, July 2024). 2. Use the current deploy files, never publish p...
✓ Kinumpirma sa issueGitHub (MUnique/OpenMU) · 2024-07-17"login server connect fail" when the server starts the GameServer
The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...
✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2009-11-04Players are disconnected from the game about one minute after entering
The anti-hack options in the GameServer config kick legit players. 1. Open MuServer\Data\commonserver.cfg and find SpeedHackPlayerBlock. 2. Set the anti-hack block like the working values...
✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2011-01-25Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files
The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...
✓ Kinumpirma ng nagsimula ng topicDarksTeam · 2015-02-13After changing the client name in the main info and replacing Main.premium, the login box (ID and password) no longer appears (files with MHP)
The Mu Hack Protection server config still had the old customer name. 1. Open C:\MuServer\MHPServer\MHPServer.ini and set CustomerName to the new name, with the right ClientVersion and Cl...
✓ Kinumpirma ng nagsimula ng topicTUServerMU · 2021-03-27
Mga video sa MUTube
Paano Mag-setup ng MuOnline Server S19 Part 2-3 gamit ang MySQL [Setup Video]
MuADMINS · 12:03 · 2025
MU Online Cross Platform Source (Mobile + PC)
MuADMINS · 2026
Paggawa ng Mu Server Season 19 Malinaw na Ipinaliwanag 0 Errors + Kinakailangang Files
Tus Videojuegos de Confianza · 26:08 · 2025
MU OFFLINE SS18 - GABAY SA PAG-INSTALL
Đẹp Plus · 20:53 · 2023