Community AlphaAlpha MUADMINS
ESEspañol
Iniciar sesión
En MuADMINSConfig ScannerSube el zip de tus archivos: rates, drops, spots, límitesAbrirEn MuADMINSEncuéntranos en DiscordPide ayuda, comparte lo que estás creando y habla de MU con otros dueños de servidores.Abrir

MuADMINS

Soluciones

Arreglos breves para problemas comunes de servidores, clientes y sitios web de MU Online, cada uno con su fuente y su fecha. “Confirmado” significa que la persona que preguntó dijo que el arreglo funcionó.

186 soluciones para “server.xml” en Instalación del servidor · Limpiar

  1. Instalación del servidor

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Confirmado por el autor del temaRaGEZONE · 2024-12-10
  2. Instalación del servidorclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Confirmado por el autor del temaImperyus Games Brasil · 2009-10-30
  3. Instalación del servidorclassic

    How do I show sub servers grouped under one server in the list?

    1. In Connectserverlist.dat the codes are 0, 1, 2... 2. Change them to 0, 21, 41, 61 (steps of 20). 3. The ConnectServer then reads them as rooms of the servers.

    ✓ Confirmado por el autor del temaImperyus Games Brasil · 2010-12-14
  4. Instalación del servidorMuEmu / LouisSeason 6 (Louis)

    JoinServer and DataServer show "[SocketManager] WSAAccept() failed with error: 10061" on start.

    1. Check DataServerAddress in common.dat. 2. Leave it at the default 127.0.0.1, it does not need your public IP. 3. Start the servers again.

    ✓ Confirmado por el autor del temaCreandoMU · 2022-02-21
  5. Instalación del servidorS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Confirmado por el autor del temaDarksTeam · 2008-06-03
  6. Instalación del servidor99b

    GameServer.exe loads for a long time and then Windows shows "Send error report / Don't Send" with every server pack

    The PC was infected with the Win32.Parite (A to C) file infector, which damages .exe files. 1. Download a Parite removal tool (the thread used AntiParite) and let it scan the processes. 2...

    ✓ Confirmado por el autor del temaDarksTeam · 2008-06-19
  7. Instalación del servidorS2 (1.03N)

    Season 2 (1.03N): the server shows as full with Loading behind it when I click it

    1. Open GameServer\Data\ServerInfo.dat. 2. Find VirtualPlayerNum = 200 and change it to VirtualPlayerNum = 0. 3. Restart the GameServer.

    ✓ Confirmado por el autor del temaDarksTeam · 2008-06-27
  8. Instalación del servidor

    How to protect the server from attackers with the firewall

    Only the ConnectServer and GameServer must be reachable from outside. 1. In the firewall block outside access for: MySQL (mysqld.exe), the DataServer(s), ExDB, EventServer, RankingServer,...

    ✓ Confirmado por el autor del temaDarksTeam · 2008-06-30
  9. Instalación del servidor

    Where to change the maximum number of users online (the GameServer shows 6500)

    1. Open the server's Data\commonserver.cfg. 2. Find NumberOfMaxUser and set the value you want. 3. Restart the GameServer.

    ✓ Confirmado por el autor del temaDarksTeam · 2009-01-18
  10. Instalación del servidorS2

    Season 2 server (SrTeam files) freezes after 2 to 3 hours: login just hangs

    The freeze came from the MonsterSetBase file. 1. Replace MonsterSetBase.txt with another, clean one (for example the original of the files). 2. Restart the server and watch it for a few h...

    ✓ Confirmado por el autor del temaDarksTeam · 2009-02-27
  11. Instalación del servidor

    All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"

    The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...

    ✓ Confirmado por el autor del temaDarksTeam · 2009-05-24
  12. Instalación del servidor

    Event server (Devil Square ranking) error: it looks for the wrong database

    1. Open the event server config svconfig.ini. 2. Change mu2003_dsn = Ranking to mu2003_dsn = MuOnline (the data source that really exists). 3. Restart the event server.

    ✓ Confirmado por el autor del temaDarksTeam · 2009-10-08
  13. Instalación del servidor

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Confirmado por el autor del temaDarksTeam · 2009-11-04
  14. Instalación del servidor

    SQL Server 2000 setup says there is not enough free disk space although 60 GB are free

    1. Extract the SQL Server 2000 installer files with WinRAR into a normal folder. 2. Run setup from that extracted folder.

    ✓ Confirmado por el autor del temaDarksTeam · 2010-08-08
  15. Instalación del servidor

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Confirmado por el autor del temaDarksTeam · 2010-12-21
  16. Instalación del servidor97d+99i

    GameServer error at start with DarkMaster 97d+99i Beta 13 files, fixed by turning off the EventChip server connection

    1. Open Data\commonserver.cfg. 2. Find EventChipServerConnect = 1 and change it to EventChipServerConnect = 0. 3. Restart the GameServer.

    ✓ Confirmado por el autor del temaDarksTeam · 2011-04-23
  17. Instalación del servidor

    GameServer starts normally but crashes after a few minutes

    1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....

    ✓ Confirmado por el autor del temaDarksTeam · 2011-05-11
  18. Instalación del servidor0.99.62T (1.0M)

    JoinServer shows an error at start with the DarksTeam 0.99.62T release files

    The JoinServer was started directly, without its start parameters. 1. Do not run joinserver.exe by itself; start it from StartUp.exe. 2. In StartUp.exe give the JoinServer the parameters...

    ✓ Confirmado por el autor del temaDarksTeam · 2012-09-08
  19. Instalación del servidorS2

    Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files

    The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...

    ✓ Confirmado por el autor del temaDarksTeam · 2015-02-13
  20. Instalación del servidor97d+99i

    "error-L1 : CloseClient INVALID_SOCKET": after some time online the GameServer disconnects all players (97d+99i, after moving from Windows Server 2003 to Windows Server 2012 R2)

    Reinstalling Windows, all updates and compatibility modes did not help; the fix was the newer DLL for the files. 1. Download the newer DLL that the developer uploaded for these 97d+99i fi...

    ✓ Confirmado por el autor del temaDarksTeam · 2017-02-14

Videos en MUTube

Más videos de “server.xml”

¿Sigues atascado? Pregúntale al Asistente MU Buscar en MuGPS

MuADMINS Community Alpha: gratis, hecho por la comunidad y en desarrollo activo.