Community AlphaAlpha MUADMINS
ENEnglish
Sign in
On MuADMINSConfig ScannerDrop your files zip: rates, drops, spots, limitsOpenOn MuADMINSMeet us on DiscordAsk for help, share what you are building and talk MU with other server owners.Open

MuADMINS

Solutions

Short fixes for common MU Online server, client and website problems, each with its source and date. “Confirmed” means the person who asked said the fix worked.

20 solutions for “connectserver port” in Server setup · Clear

  1. Server setup

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Confirmed by the topic starterDarksTeam · 2010-12-21
  2. Server setupMuEmu / LouisS8

    Two MuEmu S8 servers on one machine: the first works, the second disconnects at login although its ports (55902, 55920, 55961, 55971) are forwarded.

    1. Open the router page and check that the forwarding rules for the second server ports are really enabled, not only created. 2. If a rule turns itself off again after a refresh, delete i...

    ✓ Confirmed by the topic starterTuServerMU · 2020-06-17
  3. Server setupX-TeamS8

    X-Team MuEmu S8E3: players cannot get in because Mu Hack Protection shows an error, even with the usual ports open.

    1. Open the MHP port 55999 TCP in the firewall and router, besides 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Port 55557 does not need to be opened. 3. Check...

    ✓ Confirmed by the topic starterTuServerMU · 2017-04-21
  4. Server setupany

    Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?

    1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...

    ✓ Confirmed by the topic starterTuServerMU · 2019-05-03
  5. Server setupMuEmu / Louis0.97k

    ConnectServer Cross-Platform (MuEmu kayito): how do I build and run the ConnectServer natively on Linux?

    1. Install the build tools: on Ubuntu or Debian sudo apt install build-essential cmake libboost-all-dev (CentOS: gcc-c++ cmake boost-devel; Arch: base-devel cmake boost). On Windows use V...

    MuADMINS rewrite of the sourceNot verifiedGitHub (alisacorporation/ConnectServer) · 2025-11-02
  6. Server setupS2

    Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files

    The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...

    ✓ Confirmed by the topic starterDarksTeam · 2015-02-13
  7. Server setupSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Confirmed by the topic starterTUServerMU · 2023-09-16
  8. Server setupany

    My GameServer (port 55901 and up) sometimes fails to start because the port is already in use. How do I check the Windows dynamic port range?

    1. Since Windows Vista and Server 2008, outgoing connections use local ports 49152 to 65535 by default, which includes 55901, 55960, 55970. 2. Show the range: netsh int ipv4 show dynamicp...

    MuADMINS rewrite of the sourceNot verifiedMicrosoft Learn · 2026-02-12
  9. Server setup

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Confirmed by the topic starterRaGEZONE · 2024-12-10
  10. Server setupclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Confirmed by the topic starterImperyus Games Brasil · 2009-10-30
  11. Server setup

    How to protect the server from attackers with the firewall

    Only the ConnectServer and GameServer must be reachable from outside. 1. In the firewall block outside access for: MySQL (mysqld.exe), the DataServer(s), ExDB, EventServer, RankingServer,...

    ✓ Confirmed by the topic starterDarksTeam · 2008-06-30
  12. Server setup

    With the firewall turned on nobody can enter my server or my website; with it off they can

    The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....

    ✓ Confirmed by the topic starterDarksTeam · 2012-07-14
  13. Server setupS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Confirmed by the topic starterDarksTeam · 2008-06-03
  14. Server setupMuEmu / LouisS6

    Friends can join my MuEmu S6 server from outside, but I cannot connect from another PC in the same LAN as the server. Which port is missing?

    1. It is usually not a port: many routers do not let LAN PCs reach their own public IP (no NAT loopback). 2. Use a No-IP hostname as the server address in the ConnectServer server list, m...

    ✓ Confirmed by the topic starterTuServerMU · 2020-07-14
  15. Server setupMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Confirmed by the topic starterTuServerMU · 2018-11-18
  16. Server setupMuEmu / LouisS6

    MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?

    1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...

    ✓ Confirmed by the topic starterTuServerMU · 2018-11-16
  17. Server setupany

    I run one server on my VPS and want a second one with its own database on the same VPS, but it does not connect. What must change?

    1. Give the second server its own database and create a new ODBC data source pointing to it (same driver, Server = (local), Database = new name). 2. Point the second JoinServer and DataSe...

    ✓ Confirmed by the topic starterTuServerMU · 2019-10-09
  18. Server setupMuEmu / LouisS8

    The server works on the host PC, but other players cannot get in (MuEmu S8).

    1. Exclude main.exe from DEP and add the client folder to the antivirus exceptions. 2. Open the antihack port 55999 in the Windows firewall and in the router. 3. Allow ConnectServer and G...

    ✓ Confirmed by the topic starterTuServerMU · 2017-01-18
  19. Server setupOpenMUany

    OpenMU worked before, but after the PC ran for a while the game server cannot listen on 55901 or players cannot connect. Why?

    1. Ports 49152 to 65535 are the Windows dynamic range used for outgoing connections, so another process can already hold 55901 and up. 2. Newer OpenMU databases use 45901 to 45906 for gam...

    MuADMINS rewrite of the sourceNot verifiedGitHub (MUnique/OpenMU docs) · 2026-10-11
  20. Server setupOpenMUS6

    OpenMU in Docker on Windows: the client sees the server list but is disconnected when joining a server.

    1. Use the client version the server targets (1.04d English, Season 6 E3). 2. Open the ports in the Windows firewall (and allow NAT edge traversal). 3. The connect server hands out the IP...

    ✓ Confirmed in the issueGitHub (MUnique/OpenMU) · 2019-11-12
Still stuck? Ask the MU Assistant Search MuGPS Search MUTube

MuADMINS Community Alpha: free and community made, in active development.