MuADMINS
Lösungen
Kurze Fixes für häufige Probleme mit Server, Client und Website bei MU Online, jeweils mit Quelle und Datum. “Bestätigt” heißt: Die Person, die gefragt hat, hat gesagt, dass der Fix funktioniert hat.
28 Lösungen für “local” in Server-Setup · Zurücksetzen
OpenMU local server without internet fails with "Could not start the server listeners: Name does not resolve (api.ipify.org:443)".
1. The default Public IP resolver asks api.ipify.org for your public IP, which fails offline. 2. For local play, open the admin panel, game configuration, System. 3. Set the IP resolve se...
✓ Im Issue bestätigtGitHub (MUnique/OpenMU) · 2023-11-16OpenMU in Docker: game servers keep reporting my public IP to the client and -resolveIP / RESOLVE_IP seem ignored. How do I set loopback or local?
1. Open the admin panel and go to the game configuration, System section. 2. Change the IP Resolving setting (Public by default) to Loopback for same machine tests, Local for a LAN, or Cu...
✓ Im Issue bestätigtGitHub (MUnique/OpenMU) · 2026-02-13All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"
The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...
✓ Vom Threadersteller bestätigtDarksTeam · 2009-05-24Disconnect when entering my own server behind a router, although it worked before (after a Windows startup problem)
The PC got a different local IPv4 address, so the router's DMZ still pointed to the old one. 1. Open cmd and run ipconfig /all; note the IPv4 address. 2. In the router, set the DMZ (or th...
✓ Vom Threadersteller bestätigtDarksTeam · 2012-04-30IGCN Season 12: DataServer is not responding although TCP/IP is enabled in SQL Server
1. Open DataServer.ini and check SQLServerName. 2. When SQL Server runs on the same machine use SQLServerName = (local) or the exact PC name as shown in SQL Server Management Studio (for...
✓ Vom Threadersteller bestätigtRaGEZONE · 2020-01-08After enabling TCP/IP in SQL Server for the web, DataServer, JoinServer and GameServerCS lost the database connection. How was it fixed?
1. In SQL Server Configuration Manager keep Named Pipes and TCP/IP enabled for the instance. 2. Open the ODBC DSNs used by the server files. 3. Change the Server field from the LAN IP to...
✓ Vom Threadersteller bestätigtTuServerMU · 2020-05-23Louis S4 (TSM FirePremium) local server worked for one day, then shows SQL connection errors.
1. Create the ODBC data sources by hand in the ODBC administrator (instead of the .reg file). 2. Point them to the right SQL server and database and restart the servers.
✓ Vom Threadersteller bestätigtTuServerMU · 2018-06-11IGC DataServer stays on its loading window and never finishes starting.
1. Check the ODBC/SQL settings of the DataServer. 2. The SQL instance name was wrong. When SQL Server is on the same PC use (local) as the instance/host. 3. Start the DataServer again.
✓ Vom Threadersteller bestätigtTuServerMU · 2017-04-21IGCN License Manager: how to activate the server license again without changing the license data (Clear Activation)
1. Check that you still have a license change available (the free allowance or a bought license change service). 2. On the License Manager page open the dropdown of that license and choos...
"login server connect fail" when the server starts the GameServer
The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...
✓ Vom Threadersteller bestätigtDarksTeam · 2009-11-0497d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct
The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...
✓ Vom Threadersteller bestätigtTUServerMU · 2021-02-08JoinServer and DataServer show Could not connect to database on start.
1. Restore the MuOnline database correctly in SQL Server (from the backup shipped with your files). 2. Create the ODBC data source the servers expect, pointing to that database. 3. Make s...
✓ Vom Threadersteller bestätigtTuServerMU · 2017-07-05MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?
1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...
✓ Vom Threadersteller bestätigtTuServerMU · 2018-11-16I run one server on my VPS and want a second one with its own database on the same VPS, but it does not connect. What must change?
1. Give the second server its own database and create a new ODBC data source pointing to it (same driver, Server = (local), Database = new name). 2. Point the second JoinServer and DataSe...
✓ Vom Threadersteller bestätigtTuServerMU · 2019-10-09Friends can join my MuEmu S6 server from outside, but I cannot connect from another PC in the same LAN as the server. Which port is missing?
1. It is usually not a port: many routers do not let LAN PCs reach their own public IP (no NAT loopback). 2. Use a No-IP hostname as the server address in the ConnectServer server list, m...
✓ Vom Threadersteller bestätigtTuServerMU · 2020-07-14Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?
1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...
✓ Vom Threadersteller bestätigtTuServerMU · 2019-05-03MuEmu S4: the server and MuMaker do not see the databases on SQL Server 2008 R2 even with remote connections and TCP/IP enabled.
1. Check how SQL Server was installed: it had been set up as a named instance. 2. The files and MuMaker expect the default instance, reached as (local) or the PC name. 3. Reinstall SQL Se...
✓ Vom Threadersteller bestätigtTuServerMU · 2017-11-11MuEmu S6 (KoshGames/Louis) on SQL Server Express 2012: JoinServer says "Could not connect to database" although MuOnline is restored and the .reg files were run.
1. SQL Express installs a named instance, usually SQLEXPRESS, so (local) alone does not reach it. 2. Open the ODBC admin for your Windows bits and create the DSNs by hand. 3. In the serve...
✓ Vom Threadersteller bestätigtTuServerMU · 2020-08-08Season 2 files on SQL Server 2000: after creating the MuOnline database with the query, DataServer shows a database error. What was wrong?
1. Run the database creation query in Query Analyzer logged in as sa, without selecting another database first. 2. Check the ODBC admin: the files' ODBC.reg had created the entries under...
✓ Vom Threadersteller bestätigtTuServerMU · 2017-03-23SQL 2000 will not install on Windows 7, so how do I run DarksTeam 97d files on SQL Server 2008 R2 instead?
1. Install SQL Server 2008 R2 and set a password for sa during setup (do not skip it). 2. Restore the MuOnline database from the files. 3. Open the ODBC admin (32-bit one on 64-bit Window...
✓ Vom Threadersteller bestätigtTuServerMU · 2018-08-06
Videos auf MUTube
MU OFFLINE SS18 - INSTALLATIONSANLEITUNG
Đẹp Plus · 20:53 · 2023
Intro teilen MU Online - [MU PC] Anleitung zur Installation des MU Offline Servers von A-Z
Tổng Hợp Game Online · 1:45 · 2025
Installation von mu offline Server und Client
Brown · 4:20 · 2013
Muonline Offline-Privatserver
JP's Universe YT · 19:41 · 2019