Community AlphaAlpha MUADMINS
DEDeutsch
Anmelden
Auf MuADMINSConfig ScannerZip deiner Dateien hochladen: Rates, Drops, Spots, LimitsÖffnenAuf MuADMINSTriff uns auf DiscordFrag nach Hilfe, zeig, woran du arbeitest, und sprich mit anderen Serverbetreibern über MU.Öffnen

MuADMINS

Lösungen

Kurze Fixes für häufige Probleme mit Server, Client und Website bei MU Online, jeweils mit Quelle und Datum. “Bestätigt” heißt: Die Person, die gefragt hat, hat gesagt, dass der Fix funktioniert hat.

20 Lösungen für “data local” in Server-Setup · Zurücksetzen

  1. Server-SetupIGCNS12

    IGCN Season 12: DataServer is not responding although TCP/IP is enabled in SQL Server

    1. Open DataServer.ini and check SQLServerName. 2. When SQL Server runs on the same machine use SQLServerName = (local) or the exact PC name as shown in SQL Server Management Studio (for...

    ✓ Vom Threadersteller bestätigtRaGEZONE · 2020-01-08
  2. Server-SetupIGCNS9

    IGC DataServer stays on its loading window and never finishes starting.

    1. Check the ODBC/SQL settings of the DataServer. 2. The SQL instance name was wrong. When SQL Server is on the same PC use (local) as the instance/host. 3. Start the DataServer again.

    ✓ Vom Threadersteller bestätigtTuServerMU · 2017-04-21
  3. Server-SetupIGCN

    IGCN License Manager: how to activate the server license again without changing the license data (Clear Activation)

    1. Check that you still have a license change available (the free allowance or a bought license change service). 2. On the License Manager page open the dropdown of that license and choos...

    Neufassung der Quelle durch MuADMINSNot verifiedIGCN · 2024-10-30
  4. Server-Setupany

    After enabling TCP/IP in SQL Server for the web, DataServer, JoinServer and GameServerCS lost the database connection. How was it fixed?

    1. In SQL Server Configuration Manager keep Named Pipes and TCP/IP enabled for the instance. 2. Open the ODBC DSNs used by the server files. 3. Change the Server field from the LAN IP to...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2020-05-23
  5. Server-Setupany

    JoinServer and DataServer show Could not connect to database on start.

    1. Restore the MuOnline database correctly in SQL Server (from the backup shipped with your files). 2. Create the ODBC data source the servers expect, pointing to that database. 3. Make s...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2017-07-05
  6. Server-SetupAndere FilesS2

    Season 2 files on SQL Server 2000: after creating the MuOnline database with the query, DataServer shows a database error. What was wrong?

    1. Run the database creation query in Query Analyzer logged in as sa, without selecting another database first. 2. Check the ODBC admin: the files' ODBC.reg had created the entries under...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2017-03-23
  7. Server-SetupMuEmu / LouisS6

    MuEmu S6 by Louis: DataServer and JoinServer say 'Could not connect to database' with both included databases, even with correct IPs and open ports.

    1. The included ODBC .reg created a data source named MuOnlineS6 pointing to database MuOnlineS6. 2. Edit the ODBC data source (or the .reg) so the name and database match what the server...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2017-10-10
  8. Server-SetupSeason 8

    DataServer and JoinServer do not connect after running the ODBC file that came with the files

    The .reg or .bat ODBC file bundled with many server files does not always create the data source on your Windows. Create it by hand: 1. Open the ODBC Data Source Administrator (on 64-bit...

    ✓ Vom Threadersteller bestätigtTUServerMU · 2021-06-08
  9. Server-Setup

    JoinServer and DataServer cannot connect to the database although the backup is restored

    These files had the database name MuOnlineS6 in the server configs while the database was restored as MuOnline, so the servers looked for a database that does not exist. 1. In SQL Server...

    ✓ Vom Threadersteller bestätigtTUServerMU · 2018-09-27
  10. Server-Setup

    ODBC / DSN: the DataServer or JoinServer cannot connect to MuOnline (DSN name, 32 bit or 64 bit)

    MuEmu, Louis, MSPro, X-Team and MuDevs files connect through an ODBC System DSN: - JoinServer.ini JoinServerODBC = MuOnline, DataServer.ini DataServerODBC = MuOnline (MSPro: ODBC = MuOnli...

    Not verifiedVon MuADMINS geschrieben
  11. Server-SetupOpenMU

    OpenMU in Docker: how do I back up and restore the PostgreSQL database, and fix 'permission denied for schema config' after a restore?

    1. The openmu-db-backup container of nolt/openmu-docker runs pg_dump -Fc every BACKUP_INTERVAL seconds (default 86400), checks the dump and keeps gzipped files in ./backups/ for RETENTION...

    Neufassung der Quelle durch MuADMINSNot verifiedGitHub (nolt/openmu-docker) · 2026-10-24
  12. Server-Setup0.97d

    97d GameServer on a VPS says 'Failed to connect to SQL Server' although the SQL login, the MuOnline database and the IPs look correct

    The database and the SQL settings were fine; the IP passed to GameServer.exe in its shortcut was the problem. 1. Right-click the GameServer.exe shortcut you start the server with and open...

    ✓ Vom Threadersteller bestätigtTUServerMU · 2021-02-08
  13. Server-Setupany

    I run one server on my VPS and want a second one with its own database on the same VPS, but it does not connect. What must change?

    1. Give the second server its own database and create a new ODBC data source pointing to it (same driver, Server = (local), Database = new name). 2. Point the second JoinServer and DataSe...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2019-10-09
  14. Server-SetupMuEmu / LouisS4

    MuEmu S4: the server and MuMaker do not see the databases on SQL Server 2008 R2 even with remote connections and TCP/IP enabled.

    1. Check how SQL Server was installed: it had been set up as a named instance. 2. The files and MuMaker expect the default instance, reached as (local) or the PC name. 3. Reinstall SQL Se...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2017-11-11
  15. Server-SetupMuEmu / LouisS6

    MuEmu S6 (KoshGames/Louis) on SQL Server Express 2012: JoinServer says "Could not connect to database" although MuOnline is restored and the .reg files were run.

    1. SQL Express installs a named instance, usually SQLEXPRESS, so (local) alone does not reach it. 2. Open the ODBC admin for your Windows bits and create the DSNs by hand. 3. In the serve...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2020-08-08
  16. Server-Setup

    All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"

    The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2009-05-24
  17. Server-SetupMuEmu / LouisS4

    Louis S4 (TSM FirePremium) local server worked for one day, then shows SQL connection errors.

    1. Create the ODBC data sources by hand in the ODBC administrator (instead of the .reg file). 2. Point them to the right SQL server and database and restart the servers.

    ✓ Vom Threadersteller bestätigtTuServerMU · 2018-06-11
  18. Server-Setup

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2009-11-04
  19. Server-SetupWebZen 97d / 99b97d

    SQL 2000 will not install on Windows 7, so how do I run DarksTeam 97d files on SQL Server 2008 R2 instead?

    1. Install SQL Server 2008 R2 and set a password for sa during setup (do not skip it). 2. Restore the MuOnline database from the files. 3. Open the ODBC admin (32-bit one on 64-bit Window...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2018-08-06
  20. Server-Setupany

    How do I open the MU server ports (44405, 55901, 55919 and others) in Windows Firewall quickly and correctly?

    1. Open PowerShell as administrator on the server. 2. Create one inbound rule for all TCP ports, for example: New-NetFirewallRule -DisplayName "MU Server" -Direction Inbound -Protocol TCP...

    Neufassung der Quelle durch MuADMINSNot verifiedMicrosoft Learn · 2025-05-14
Kommst du immer noch nicht weiter? Frag den MU-Assistenten MuGPS durchsuchen Auf MUTube suchen

MuADMINS Community Alpha: kostenlos, von der Community gemacht, in aktiver Entwicklung.