Community AlphaAlpha MUADMINS
DEDeutsch
Anmelden
Auf MuADMINSConfig ScannerZip deiner Dateien hochladen: Rates, Drops, Spots, LimitsÖffnenAuf MuADMINSTriff uns auf DiscordFrag nach Hilfe, zeig, woran du arbeitest, und sprich mit anderen Serverbetreibern über MU.Öffnen

MuADMINS

Lösungen

Kurze Fixes für häufige Probleme mit Server, Client und Website bei MU Online, jeweils mit Quelle und Datum. “Bestätigt” heißt: Die Person, die gefragt hat, hat gesagt, dass der Fix funktioniert hat.

91 Lösungen für “connect” in Server-Setup · Zurücksetzen

  1. Server-SetupOpenMU

    OpenMU: a player stays 'already connected' after a dropped connection and cannot log in again, even with the right password

    1. The old session stays registered while the TCP connection to OpenMU is still open. With the web client the WebSocket proxy keeps that connection alive, so every new login gets AccountA...

    ✓ Im Issue bestätigtGitHub (MUnique/OpenMU) · 2026-10-07
  2. Server-SetupMuEmu / LouisSeason 6 (Louis)

    Two accounts always say they are already logged in, but they are not in game and cannot be disconnected.

    1. The online state is kept by the JoinServer. 2. Use the JoinServer option to disconnect accounts. 3. Then the account can log in again.

    ✓ Vom Threadersteller bestätigtCreandoMU · 2021-01-31
  3. Server-SetupS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2008-06-03
  4. Server-Setup

    All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"

    The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2009-05-24
  5. Server-Setup

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2009-11-04
  6. Server-Setup

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2010-12-21
  7. Server-Setup97d+99i

    GameServer error at start with DarkMaster 97d+99i Beta 13 files, fixed by turning off the EventChip server connection

    1. Open Data\commonserver.cfg. 2. Find EventChipServerConnect = 1 and change it to EventChipServerConnect = 0. 3. Restart the GameServer.

    ✓ Vom Threadersteller bestätigtDarksTeam · 2011-04-23
  8. Server-Setup

    Disconnect when entering my own server behind a router, although it worked before (after a Windows startup problem)

    The PC got a different local IPv4 address, so the router's DMZ still pointed to the old one. 1. Open cmd and run ipconfig /all; note the IPv4 address. 2. In the router, set the DMZ (or th...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2012-04-30
  9. Server-SetupS2

    Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files

    The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2015-02-13
  10. Server-Setup97d+99i

    "error-L1 : CloseClient INVALID_SOCKET": after some time online the GameServer disconnects all players (97d+99i, after moving from Windows Server 2003 to Windows Server 2012 R2)

    Reinstalling Windows, all updates and compatibility modes did not help; the fix was the newer DLL for the files. 1. Download the newer DLL that the developer uploaded for these 97d+99i fi...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2017-02-14
  11. Server-SetupS3

    Using a skill like Twisting Slash for a few seconds disconnects the player (Season 3.1 KOR files)

    1. The disconnect comes from the GameServer antihack checks that treat fast repeated skill use as a hack. 2. Open commonserver.dat and disable the antihack settings (the topic starter dis...

    ✓ Vom Threadersteller bestätigtRaGEZONE · 2018-03-31
  12. Server-SetupIGCNS9

    IGCN S9 E2 repack: 'No active Game Servers found' and disconnect when the server settings use a DDNS hostname

    1. Put the real (numeric) IP address in the GameServer and server list settings instead of the DDNS hostname. 2. Restart the ConnectServer and GameServer and connect again. 3. If you must...

    ✓ Vom Threadersteller bestätigtRaGEZONE · 2018-12-29
  13. Server-Setup

    Replacing WZ_DISCONNECT_MEMB for MuCore gives 'Msg 468 ... Cannot resolve the collation conflict between Latin1_General_CS_AS and SQL_Latin1_General_CP1_CI_AS'

    1. The procedure compares memb___id from MEMB_INFO with memb___id from MEMB_STAT, and the two columns use different collations. 2. In SQL Server Management Studio set the same collation o...

    ✓ Vom Threadersteller bestätigtRaGEZONE · 2015-11-30
  14. Server-SetupIGCNS9

    IGCN S9 E2 repack: DataServer says 'Login failed for user ...' (SQLSTATE 28000) and 'DATA SERVER CANNOT CONNECT TO MSSQL'

    1. The repack DataServer config came with a SQL login that does not exist on your SQL Server (here a random name like D2a78Rtko0), so the login fails. 2. Open the database settings of the...

    ✓ Vom Threadersteller bestätigtRaGEZONE · 2019-07-14
  15. Server-SetupMuEmu / LouisS6

    MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.

    1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2018-11-18
  16. Server-SetupMuEmu / LouisS6

    MuEmu S6 (Louis): the client reaches the server selection, but when I pick the server it disconnects. What is missing?

    1. The ConnectServer port works, but the GameServer port (55901 by default) is blocked. 2. For a local test, add an inbound firewall rule for the GameServer port (or briefly turn off Wind...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2018-11-16
  17. Server-SetupAndere Files0.99b

    On a 0.99b server the ConnectServer closes by itself when I replace the numeric IP with a No-IP hostname. Why?

    1. Old 0.99b ConnectServer builds only accept an address as long as a numeric IP. 2. Keep the hostname at 14 characters or less including the dots (the length of a full IPv4 address strin...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2021-02-10
  18. Server-Setupany

    Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?

    1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2019-05-03
  19. Server-SetupOpenMUS6

    OpenMU in Docker on Windows: the client sees the server list but is disconnected when joining a server.

    1. Use the client version the server targets (1.04d English, Season 6 E3). 2. Open the ports in the Windows firewall (and allow NAT edge traversal). 3. The connect server hands out the IP...

    ✓ Im Issue bestätigtGitHub (MUnique/OpenMU) · 2019-11-12
  20. Server-SetupSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Vom Threadersteller bestätigtTUServerMU · 2023-09-16

Videos auf MUTube

Mehr Videos zu „connect“

Kommst du immer noch nicht weiter? Frag den MU-Assistenten MuGPS durchsuchen

MuADMINS Community Alpha: kostenlos, von der Community gemacht, in aktiver Entwicklung.