MuADMINS
Lösungen
Kurze Fixes für häufige Probleme mit Server, Client und Website bei MU Online, jeweils mit Quelle und Datum. “Bestätigt” heißt: Die Person, die gefragt hat, hat gesagt, dass der Fix funktioniert hat.
10 Lösungen für “client ip” in Server-Setup · Zurücksetzen
Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files
The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...
✓ Vom Threadersteller bestätigtDarksTeam · 2015-02-13OpenMU in Docker: game servers keep reporting my public IP to the client and -resolveIP / RESOLVE_IP seem ignored. How do I set loopback or local?
1. Open the admin panel and go to the game configuration, System section. 2. Change the IP Resolving setting (Public by default) to Loopback for same machine tests, Local for a LAN, or Cu...
✓ Im Issue bestätigtGitHub (MUnique/OpenMU) · 2026-02-13OpenMu Client Babylon: how do I install my own OpenMU server with the browser client on a VPS?
1. Use a VPS with Ubuntu 22.04+ or Debian 12+ (or Rocky/Alma 9) with at least 4 GB RAM and 30 GB disk; Windows 10/11 or Server 2022 also works. A domain is optional; with one, players get...
Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list
1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...
✓ Vom Threadersteller bestätigtRaGEZONE · 2024-12-10IGCN S9 E2 repack: IGC tools do not run and the client disconnects with 127.0.0.1 in the configs
1. Do not use 127.0.0.1 in the server IP settings of this repack. 2. Open CMD, run ipconfig and take your IPv4 address. 3. Put that IPv4 address in every server IP setting (and in the cli...
✓ Vom Threadersteller bestätigtRaGEZONE · 2019-06-11MuEmu S6 on a VPS: the client works inside the VPS, but from home it shows the antihack logo, says it could not connect and closes.
1. When it works on the VPS itself but not from outside, the Windows Firewall of the VPS is the usual cause. 2. On the VPS, create inbound TCP allow rules for the ConnectServer port (4440...
✓ Vom Threadersteller bestätigtTuServerMU · 2018-11-18OpenMU in Docker on Windows: the client sees the server list but is disconnected when joining a server.
1. Use the client version the server targets (1.04d English, Season 6 E3). 2. Open the ports in the Windows firewall (and allow NAT edge traversal). 3. The connect server hands out the IP...
✓ Im Issue bestätigtGitHub (MUnique/OpenMU) · 2019-11-12Friends can join my MuEmu S6 server from outside, but I cannot connect from another PC in the same LAN as the server. Which port is missing?
1. It is usually not a port: many routers do not let LAN PCs reach their own public IP (no NAT loopback). 2. Use a No-IP hostname as the server address in the ConnectServer server list, m...
✓ Vom Threadersteller bestätigtTuServerMU · 2020-07-14Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?
1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...
✓ Vom Threadersteller bestätigtTuServerMU · 2019-05-03Mu Hack Protection (Rodrigo117): the MHP logo shows, but after it closes main.exe never opens
The protection was packed with the wrong plugin DLL. 1. Open your MHP packaging setup and check the plugin list. 2. Remove any DLL that is not one of your client plugins; the asker had ad...
✓ Vom Threadersteller bestätigtTUServerMU · 2020-08-06


