Community AlphaAlpha MUADMINS
DEDeutsch
Anmelden
Auf MuADMINSConfig ScannerZip deiner Dateien hochladen: Rates, Drops, Spots, LimitsÖffnenAuf MuADMINSTriff uns auf DiscordFrag nach Hilfe, zeig, woran du arbeitest, und sprich mit anderen Serverbetreibern über MU.Öffnen

MuADMINS

Lösungen

Kurze Fixes für häufige Probleme mit Server, Client und Website bei MU Online, jeweils mit Quelle und Datum. “Bestätigt” heißt: Die Person, die gefragt hat, hat gesagt, dass der Fix funktioniert hat.

22 Lösungen für “ServerList” in Server-Setup für WebZen 97d / 99b und alle Files · Zurücksetzen

  1. Server-Setup

    Two servers (x100 and x10) on two different VPS: the client only shows one of them in the server list

    1. Let one ConnectServer (on VPS 1, the machine that runs the full server) send the server list for both: add both GameServers to its server list with their server code, IP and port. 2. G...

    ✓ Vom Threadersteller bestätigtRaGEZONE · 2024-12-10
  2. Server-Setup

    How to change the ConnectServer port 44405, and login fails after changing it

    1. Use the BoR Team ConnectServer, which has ini files with a port option, and set the new port there. 2. Put the same port in the launcher. 3. If login still fails, open MuServer\Connect...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2010-12-21
  3. Server-Setupany

    Two servers on one VPS: after creating a character (Summoner, Elbeland) the player is sent to the wrong server code from MapServerInfo

    With subservers the main MapServerInfo must know every GameServer. 1. Open the main Data\MapServerInfo. 2. Add the index (server code) lines of every GameServer and every GameServerCS you...

    ✓ Vom Threadersteller bestätigtTUServerMU · 2021-02-21
  4. Server-Setupany

    ConnectServer and GameServer drop every few hours with WSASend error 10054 and protocol header errors once many players join.

    1. Check the real player limit of your files: these were built for 250 users, not 1000. 2. Above that number the server falls over. 3. Add a sub server (another GameServer) to spread play...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2021-05-30
  5. Server-Setupclassic (MMT)

    New sub server (MMT files) gives a bind error and restarts.

    1. The sub server used the same port as the main one. 2. Give it its own port (for example 55903) and open it in the firewall. 3. Change its ServerCode in ServerList and MapServerInfo and...

    ✓ Vom Threadersteller bestätigtImperyus Games Brasil · 2009-10-30
  6. Server-Setupclassic

    How do I show sub servers grouped under one server in the list?

    1. In Connectserverlist.dat the codes are 0, 1, 2... 2. Change them to 0, 21, 41, 61 (steps of 20). 3. The ConnectServer then reads them as rooms of the servers.

    ✓ Vom Threadersteller bestätigtImperyus Games Brasil · 2010-12-14
  7. Server-Setup

    All servers start fine, but in game after pressing Connect it says "You are disconnected from the server"

    The ConnectServer files still had a wrong IP. 1. Edit these files and put your local IP in each: D:\MuServer\CS\Connectserverlist, D:\MuServer\CS\Data\Connectserverlist, D:\MuServer\CS\Da...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2009-05-24
  8. Server-SetupS2

    Season 2 files (KarLi tutorial): everything starts except GameServerCS, which fails

    1. Use your LAN address (192.168.x.x) only in MapServerInfo.dat and in the ConnectServer ServerList.dat. 2. Everywhere else in the server configs and the startup put 127.0.0.1. 3. In main...

    ✓ Vom Threadersteller bestätigtRaGEZONE · 2018-10-25
  9. Server-SetupS2 (1.03N)

    Season 2 (1.03N): the server shows as full with Loading behind it when I click it

    1. Open GameServer\Data\ServerInfo.dat. 2. Find VirtualPlayerNum = 200 and change it to VirtualPlayerNum = 0. 3. Restart the GameServer.

    ✓ Vom Threadersteller bestätigtDarksTeam · 2008-06-27
  10. Server-Setup

    After about one hour of uptime nobody can log in: the login just keeps loading

    1. Set the server startup tool to reload (restart) the ConnectServer at an interval; the answer says this is done on all versions. 2. Restart the servers.

    ✓ Vom Threadersteller bestätigtDarksTeam · 2009-04-29
  11. Server-Setup

    GameServer starts normally but crashes after a few minutes

    1. First read the GameServer logs: a broken event (Blood Castle, Devil Square) can stop the GS. 2. In this case the events and the GameServer were fine: the culprit was the ConnectServer....

    ✓ Vom Threadersteller bestätigtDarksTeam · 2011-05-11
  12. Server-SetupS2

    Client disconnects after choosing the server; the client log shows it connecting to someone else's IP (10.0.0.33, port 55901) with Pinkof Season 2 files

    The server files and the client still pointed to the IP of the person who packed them. 1. Put your own IP in the ConnectServer server list config. 2. Put your own IP in the JoinServer con...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2015-02-13
  13. Server-SetupSeason 18 Episode 2

    Client disconnects right after choosing the server (server on a VPS)

    The server list shows, so the ConnectServer port is open, but the client is dropped when it moves on to the GameServer: the GameServer port is closed somewhere. 1. Find the GameServer por...

    ✓ Vom Threadersteller bestätigtTUServerMU · 2023-09-16
  14. Server-Setupany

    I run one server on my VPS and want a second one with its own database on the same VPS, but it does not connect. What must change?

    1. Give the second server its own database and create a new ODBC data source pointing to it (same driver, Server = (local), Database = new name). 2. Point the second JoinServer and DataSe...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2019-10-09
  15. Server-Setupany

    Server on my home PC works for me with the IPv4 address, but friends get disconnected even with ports added to firewall and router. What is wrong?

    1. A private (LAN) address like 192.168.x.x only works inside your own network. 2. For outside players, put your public IP (or a No-IP hostname) in the server side IP settings (ConnectSer...

    ✓ Vom Threadersteller bestätigtTuServerMU · 2019-05-03
  16. Server-Setup

    JoinServer and DataServer cannot connect to the database although the backup is restored

    These files had the database name MuOnlineS6 in the server configs while the database was restored as MuOnline, so the servers looked for a database that does not exist. 1. In SQL Server...

    ✓ Vom Threadersteller bestätigtTUServerMU · 2018-09-27
  17. Server-SetupS3E1 (1.04H)

    GameServer says "Please input authentication server address and port number. => LoginServer connect fail" (Season 3 Episode 1, 1.04H)

    The server starter did not pass the JoinServer and DataServer addresses to the GameServer. 1. Open ServerStartUp.ini. 2. Give the JoinServer the parameters /p55970 /ca:ip: /cp55557. 3. Gi...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2008-06-03
  18. Server-Setup

    How to protect the server from attackers with the firewall

    Only the ConnectServer and GameServer must be reachable from outside. 1. In the firewall block outside access for: MySQL (mysqld.exe), the DataServer(s), ExDB, EventServer, RankingServer,...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2008-06-30
  19. Server-Setup

    "login server connect fail" when the server starts the GameServer

    The confirmed cause was an IP address that was not changed in one of the server configs. 1. Go through the configs of ConnectServer, JoinServer, DataServer and GameServer. 2. Replace ever...

    ✓ Vom Threadersteller bestätigtDarksTeam · 2009-11-04
  20. Server-Setup

    With the firewall turned on nobody can enter my server or my website; with it off they can

    The firewall blocks the server ports. 1. In the firewall allow (unblock) TCP 44405 (ConnectServer), 55901 (GameServer) and 55919 (GameServer CS). 2. Also allow port 80 for the website. 3....

    ✓ Vom Threadersteller bestätigtDarksTeam · 2012-07-14

Videos auf MUTube

Mehr Videos zu „ServerList“

Kommst du immer noch nicht weiter? Frag den MU-Assistenten MuGPS durchsuchen

MuADMINS Community Alpha: kostenlos, von der Community gemacht, in aktiver Entwicklung.