MuADMINS
Решения
Короткие исправления частых проблем серверов, клиентов и сайтов MU Online, каждое с источником и датой. “Подтверждено” означает, что автор вопроса сообщил, что исправление сработало.
Решений: 31 по запросу “character” в категории «Геймплей» · Сбросить
IGCN Season 13 files: how to give new characters a starting amount of zen.
1. In SSMS run on MuOnline a query that creates an INSERT trigger on dbo.Character (named Bonus in the thread). 2. The trigger reads the new Name from INSERTED and runs UPDATE Character S...
✓ Подтверждено автором темыTuServerMU · 2018-10-15MuEmu S6 PvP: Dark Lord skills do almost no damage to other characters while the other classes are fine.
1. This is class balance. 2. Open GameServer/DATA/Character and raise the damage values that belong to the Dark Lord. 3. Restart or reload and test PvP again.
✓ Подтверждено автором темыTuServerMU · 2020-07-26Kayito MuEmu 0.97k: after lowering MaxCharacterLevel in Common.dat from 1000 to 400, players level much faster than before.
1. The default experience formula is built for level 1000. 2. When you change the max level, adapt the experience table in the GameServer source: User.cpp, gObjSetExperienceTable. 3. Also...
✓ Подтверждено в issueGitHub (nicomuratona/MuEmu-0.97k-kayito) · 2024-09-15How do I remove the timed (expiring) starting items new characters get?
1. Open MuServer/Data/Custom/CustomStartItem. 2. Remove or edit the starting item lines. 3. Restart the GameServer.
✓ Подтверждено автором темыCreandoMU · 2021-06-03MuEmu (Emerson repack update 25): new characters get welcome items; where is that removed? It is not a SQL script
1. The start items are given by the server file MuServer\Data\Custom\CustomStartItem.txt, not by a database script. 2. Remove or comment the item lines there (or switch the system off in...
✓ Подтверждено автором темыTUServerMU · 2021-06-03MuEmu: the reset limit was set to 30 but a character with 30 resets can still /reset to 31
1. Open MuServer\GameServer\Data\GameServerInfo - Command.txt (reset command section). 2. Set the general limit CommandResetLimit for every account level (AL0 to AL3) to 30; this was the...
✓ Подтверждено автором темыTUServerMU · 2020-11-02A dialog box appears and the character cannot enter Barracks (Balgass Barracks)
The character had been changed with an editor and had not done any quest, so the Barracks entry check failed. 1. Use a character that really did the required quests (in Season 6 the Barra...
✓ Подтверждено автором темыTUServerMU · 2020-08-08Season 6: Chaos Castle always sends the character to Chaos Castle 7 whatever the level.
1. Chaos Castle 1 to 6 are chosen by level only for 1st and 2nd class characters. 2. 3rd class characters always go to Chaos Castle 7, even at low level. 3. Test with a 1st or 2nd class c...
✓ Подтверждено автором темыTuServerMU · 2019-10-180.97d+99i: /move stadium sends the character to the soccer area.
1. 97d+99i files have no MoveReq.txt. 2. Edit line 50 in the server Gate.txt and in the client Gate.bmd. 3. Save both and test.
✓ Подтверждено автором темыImperyus Games Brasil · 2011-06-30Louis S6 Up19: how do I disable the stats/rank box shown when pointing at a character?
1. Open GameServer/Data/GameServerInfo - Custom.txt. 2. Find the Custom RankUser settings and set CustomRankUserSwitch to 0. 3. Restart the GameServer.
✓ Подтверждено автором темыCreandoMU · 2023-02-08Louis files: the custom rank title over characters changes with resets but not with level. How do I rank by level?
1. Open Custom.dat and Data/Custom/CustomRankUser.txt. 2. Change the rank user Type from reset to level in both. 3. Restart the GameServer and relog.
✓ Подтверждено автором темыCreandoMU · 2020-10-14Where to set how many stat points a character gets per level
In these files it is not in CommonServer.cfg but in the GameServer folder. 1. Open D:\MuServer\GameServer\CTGSSet.ini. 2. Set MagSword= (points for DL and MG), Level220Down= (DW, DK, Elf...
✓ Подтверждено автором темыDarksTeam · 2009-04-04Aida added to the M (move) window, but choosing it leaves the character in Lorencia
The move gate pointed to the wrong map number. 1. Open the server Gate.txt and find the gates used by your Aida move entries (in the thread gates 119 and 140). 2. The map column must be 3...
✓ Подтверждено автором темыTUServerMU · 2023-08-26A newly added custom item disappears when the character moves to Crywolf
Crywolf runs on GameServerCS, which did not know the new item. 1. After adding items, reload or restart every GameServer, including GameServerCS, so all of them load the same item list. 2...
✓ Подтверждено автором темыTUServerMU · 2020-09-16Items put on a character with Titan Editor Premium cannot be taken off: 'Este es un elemento duplicado'
The files block items with a repeated serial (anti dupe), and items written by the editor got repeated serials. 1. Delete the items that were added with the editor. 2. Create items in gam...
✓ Подтверждено автором темыTUServerMU · 2020-05-17MuEmu S6: how to set how many stat points a character gets on each /reset (wanted 500 points per reset)
The points per reset are set in the reset command block of the GameServer command file, not in Common. 1. Open MuServer\GameServer\DATA\GameServerInfo - Command.txt and find the Reset Com...
✓ Подтверждено автором темыTUServerMU · 2016-11-13Entering the Arena (Stadium) keeps throwing the character back to Lorencia or makes it glitch and jump around
1. The Arena terrain (.att) on the server does not match the client one, so the server rejects positions that the client allows and moves you back. 2. Use the same terrain on both sides:...
✓ Подтверждено автором темыRaGEZONE · 2022-08-21Castle Siege mark registration says 'Incorrect Item was Registered' although the character has Signs of Lord
1. The signs in this test were created with a GM command, and those are refused by the registration NPC. 2. Use Signs of Lord that dropped from monsters; those register normally. 3. Test...
✓ Подтверждено автором темыRaGEZONE · 2020-03-26ExTeam S6E3: moving to Dungeon (also with the GM move command or by walking through the entrance) sends the character straight back to Lorencia; other maps work.
1. Check that World2/Object2 exist in the client and that gates.txt has the Dungeon (map 1) gates. 2. The real cause was the Dungeon Siege event config, which locks the map. 3. Disable Du...
✓ Подтверждено автором темыRaGEZONE · 2021-04-11How to limit a sub server so only characters within a reset range can enter?
1. Open GameServer/DATA/Common for that sub server. 2. Set ServerMinReset and ServerMaxReset (ServerMinLevel and ServerMaxLevel work the same way for level). 3. Restart that GameServer.
✓ Подтверждено автором темыTuServerMU · 2020-08-06
Видео на MUTube
ТИРЛИСТ MU ONLINE! 🤩 | Лучший ПЕРСОНАЖ на данный момент в 2023🤔 | by OSNAR ONLINE 🔥
OSNAR ONLINE · 16:25 · 2023
Class Renewal Magic Gladiator с одноручным LvL 970 - Mu Online Webzen S18.2.2
Seiti Mu · 5:45 · 2024
Crusader - The New Class of Season 21 | Artic MU No-Reset
articmu Online · :21 · 2026
Mu Online Season 18 - Illusion Knight (обзор нового персонажа)
Mu Online Guide · 2:36 · 2022