Community AlphaAlpha MUADMINS
PLPolski
Zaloguj się
Na MuADMINSConfig ScannerWgraj zip swoich plików: rates, dropy, spoty, limityOtwórzNa MuADMINSSpotkajmy się na DiscordziePoproś o pomoc, pokaż, nad czym pracujesz, i rozmawiaj o MU z innymi właścicielami serwerów.Otwórz

MuADMINS

Rozwiązania

Krótkie poprawki częstych problemów z serwerem, klientem i stroną MU Online, każda ze źródłem i datą. “Potwierdzone” oznacza, że osoba, która pytała, potwierdziła, że poprawka zadziałała.

Rozwiązania: 6 dla “127.0.0.1” w kategorii Klient gry · Wyczyść

  1. Klient gryOpenMUany

    OpenMU: I start main.exe with the ClientLauncher pointing to 127.0.0.1:44405 and nothing happens, the server never sees a connection.

    1. The original client refuses 127.0.0.1. 2. Use another loopback address instead, usually 127.127.127.127, with port 44405. 3. Set it in the ClientLauncher (or in main.exe with a hex edi...

    ✓ Potwierdzone w zgłoszeniuGitHub (MUnique/OpenMU) · 2019-02-15
  2. Klient gryOpenMU

    OpenMU: the client cannot connect when the server and the client run on the same PC

    The original client blocks the address 127.0.0.1. OpenMU documentation: use any 127.x.x.x address except 127.0.0.1. 1. Start OpenMU and check in the admin panel (port 80) that the connect...

    Opracowanie źródła przez MuADMINSNot verifiedOpenMU on GitHub
  3. Klient gryInne plikiS9

    Yomalex MuEmu (C#) with the Season 9 client: CSEmu lists the server but the client shows "You are disconnected from the server" a few seconds after start.

    1. The Season 9 client used by this project is an IGCN client: rename the project Main.dll to IGC.dll and replace it in the client. 2. Do not use 127.0.0.1 as the server address: the clie...

    ✓ Potwierdzone w zgłoszeniuGitHub (Yomalex/MuEmu) · 2023-06-28
  4. Klient gryMuEmu / LouisS6

    'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).

    1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....

    ✓ Potwierdzone przez autora tematuTuServerMU · 2021-02-20
  5. Klient gryMuEmu / LouisS6

    A local test server does not appear in the client server list (MuEmu S6 E3 files).

    1. Run ipconfig and take the IPv4 address. 2. Put that IPv4 (not 127.0.0.1 and not the sample IP from a guide) in MAIN_INFO and AH_INFO. 3. Regenerate and copy the files into the client....

    ✓ Potwierdzone przez autora tematuTuServerMU · 2019-01-25
  6. Klient gryOpenMUany

    OpenMU: which connect server port should my client use, and why do I get disconnected right after choosing a server?

    1. Use port 44405 for the original client and 44406 for the open source client (sven-n/MuMain). 2. A disconnect right after server selection means the address reported by the IP resolver...

    Opracowanie źródła przez MuADMINSNot verifiedGitHub (MUnique/OpenMU docs) · 2026-08-23
Nadal masz problem? Zapytaj Asystenta MU Szukaj w MuGPS Szukaj w MUTube

MuADMINS Community Alpha: za darmo, tworzone przez społeczność, w aktywnym rozwoju.