MuADMINS
Soluções
Correções curtas para problemas comuns de servidor, cliente e site de MU Online, cada uma com a fonte e a data. “Confirmado” significa que quem perguntou disse que a correção funcionou.
16 soluções para “ServerList” em Cliente do jogo · Limpar
How do I change the server name shown in the client server list?
1. Season 6 clients: the name is in Client\Data\Local\ServerList.bmd. 2. Open it with MagicHand: Files BMD > ServerList > Edit File ServerList.bmd, load your file, edit the name and save....
✓ Confirmado pelo autor do tópicoRaGEZONE · 2012-11-25A local test server does not appear in the client server list (MuEmu S6 E3 files).
1. Run ipconfig and take the IPv4 address. 2. Put that IPv4 (not 127.0.0.1 and not the sample IP from a guide) in MAIN_INFO and AH_INFO. 3. Regenerate and copy the files into the client....
✓ Confirmado pelo autor do tópicoTuServerMU · 2019-01-25Two separate servers (not subservers) both show in the client as server 1 with the same name
The client serverlist file was broken, not the server codes. 1. Replace the client Data serverlist.bmd with a working one (for example from another client of the same version) and edit th...
✓ Confirmado pelo autor do tópicoTUServerMU · 2021-06-18'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).
1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....
✓ Confirmado pelo autor do tópicoTuServerMU · 2021-02-20The server list shows, but selecting the server disconnects at once (Louis S6 Update 4 premium files with a premium client).
1. Check the ports are open. 2. Check the IPs. 3. Make the client serial exactly the same as the serial in the files; the client serial was the missing part.
✓ Confirmado pelo autor do tópicoTuServerMU · 2018-11-10The server select screen shows my server as 'Name-12'; how do I make it show 1?
1. The number after the name is the GameServer code plus 1: code 11 in the ConnectServer server list shows as 12 in the client. That is normal. 2. Change the server code to 0 in the Conne...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2018-02-01MGTEAM Season XI files: 'New version of the game is required' and I do not know where to change version and serial
1. The client version and serial must match the GameServer exactly. 2. In these files the server side values are in GameServer\Data\GameServerInfo - Common.dat. 3. Put the version and ser...
✓ Confirmado pelo autor do tópicoRaGEZONE · 2017-09-17IGCN Season 12: the server runs, but after loading the client says the game needs to be updated.
1. Open IGCData/IGC_MapServerInfo.xml on the server and read the client version and serial. 2. Put the same IP, version and serial in the client info editor (serverinfo generator). 3. Gen...
✓ Confirmado pelo autor do tópicoTuServerMU · 2019-04-06OpenMU: I start main.exe with the ClientLauncher pointing to 127.0.0.1:44405 and nothing happens, the server never sees a connection.
1. The original client refuses 127.0.0.1. 2. Use another loopback address instead, usually 127.127.127.127, with port 44405. 3. Set it in the ClientLauncher (or in main.exe with a hex edi...
✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2019-02-15MuOnline Clone (MuMono): 'Data path not found', or the client cannot connect to the server
1. The client needs the Season 20 (1.20.61) client data for its assets but speaks the Season 6 protocol. 2. *Data path not found*: set DataPath in Client.Main/Constants.cs to your Data fo...
OpenMU: which connect server port should my client use, and why do I get disconnected right after choosing a server?
1. Use port 44405 for the original client and 44406 for the open source client (sven-n/MuMain). 2. A disconnect right after server selection means the address reported by the IP resolver...
OpenMU: which serial does the Season 6 Episode 3 main.exe need, and is there a launcher instead of hex editing the IP?
1. OpenMU expects the GMO Season 6 Episode 3 serial k1Pk2jcET48mxL3b (hex 6B 31 50 6B 32 6A 63 45 54 34 38 6D 78 4C 33 62). 2. You can see it in the admin panel: Servers, the connect serv...
✓ Confirmado na issueGitHub (MUnique/OpenMU) · 2020-04-23How to make a 1.04D main.exe connect to my server (version and serial)
1. In the [GameServerInfo] section of the server config the client version is written as numbers: ClientExeVersion = 1.04.04 means 1.04D (the last number is the letter: 4 = D). 2. Put the...
✓ Confirmado pelo autor do tópicoDarksTeam · 2008-05-16The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?
1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...
✓ Confirmado pelo autor do tópicoTuServerMU · 2019-04-30The server shows online but the login box never appears; after a few seconds the client disconnects (Louis S6 Premium Update 13).
1. In MAIN_INFO MainInfo.ini use the same CustomerName, Version and Serial as GameServer and GameServerCS (Data/GameServerInfo - Common.dat), plus your server IP. 2. Generate; main.premiu...
✓ Confirmado pelo autor do tópicoTuServerMU · 2019-09-08OpenMU: the client cannot connect when the server and the client run on the same PC
The original client blocks the address 127.0.0.1. OpenMU documentation: use any 127.x.x.x address except 127.0.0.1. 1. Start OpenMU and check in the admin panel (port 80) that the connect...
Vídeos no MUTube
Como Editar o Nome da Server List - MU Online
District Gaming · 5:07 · 2019
Config ServerList Mu Online | Files Premium KG Up 20.8 | By BenjaminTv
BenjaminTv · 5:14 · 2024
Server List Custom do ConnectServer - kayito
Nicolás Muratona · 3:15 · 2021
[Гайд] Создание вещи для Mu Online в MilkShape 3D
mmorpgandonlinegames · 14:59 · 2012