MuADMINS
Soluzioni
Fix brevi per i problemi comuni di server, client e siti web di MU Online, ognuno con la sua fonte e la sua data. “Confermato” significa che chi ha fatto la domanda ha detto che il fix ha funzionato.
7 soluzioni per “connectserver port” in Client di gioco · Azzera
OpenMU: which connect server port should my client use, and why do I get disconnected right after choosing a server?
1. Use port 44405 for the original client and 44406 for the open source client (sven-n/MuMain). 2. A disconnect right after server selection means the address reported by the IP resolver...
MuOnline Clone (MuMono): 'Data path not found', or the client cannot connect to the server
1. The client needs the Season 20 (1.20.61) client data for its assets but speaks the Season 6 protocol. 2. *Data path not found*: set DataPath in Client.Main/Constants.cs to your Data fo...
The client says "You are disconnected from the server" although the IPs, ah.info and main.info look correct. Where should I look?
1. Check that the basic ports are open: ConnectServer (44405) and GameServer (55901, 55919 for the CS server). 2. Open the client main.info settings again and check every value: IP, port...
✓ Confermato dall'autore della discussioneTuServerMU · 2019-04-30OpenMU: I start main.exe with the ClientLauncher pointing to 127.0.0.1:44405 and nothing happens, the server never sees a connection.
1. The original client refuses 127.0.0.1. 2. Use another loopback address instead, usually 127.127.127.127, with port 44405. 3. Set it in the ClientLauncher (or in main.exe with a hex edi...
✓ Confermato nella issueGitHub (MUnique/OpenMU) · 2019-02-15'You are disconnected from the server' when selecting the server, after the IP was changed in many config files (MuEmu files).
1. Put your IP only in ConnectServer/ServerList.dat and GameServer Data/MapServerInfo.dat. 2. Leave every other IP entry at 127.0.0.1. 3. If you use the antihack, open its port 55999. 4....
✓ Confermato dall'autore della discussioneTuServerMU · 2021-02-20The server list shows, but selecting the server disconnects at once (Louis S6 Update 4 premium files with a premium client).
1. Check the ports are open. 2. Check the IPs. 3. Make the client serial exactly the same as the serial in the files; the client serial was the missing part.
✓ Confermato dall'autore della discussioneTuServerMU · 2018-11-10OpenMU: the client cannot connect when the server and the client run on the same PC
The original client blocks the address 127.0.0.1. OpenMU documentation: use any 127.x.x.x address except 127.0.0.1. 1. Start OpenMU and check in the admin panel (port 80) that the connect...