Community AlphaAlpha MUADMINS
ITItaliano
Accedi
Su MuADMINSConfig ScannerCarica lo zip dei tuoi file: rates, drop, spot, limitiApriSu MuADMINSIncontraci su DiscordChiedi aiuto, condividi quello che stai creando e parla di MU con altri proprietari di server.Apri

MuADMINS

Soluzioni

Fix brevi per i problemi comuni di server, client e siti web di MU Online, ognuno con la sua fonte e la sua data. “Confermato” significa che chi ha fatto la domanda ha detto che il fix ha funzionato.

63 soluzioni in Client di gioco per IGCN e qualsiasi file · Azzera

  1. Client di giocoIGCNS9

    IGCN S9: Crywolf (and other maps such as Barracks) do not appear in the move (M) list, even after adding them to the client bmd.

    1. The client has one move file per language (ENG, SPN, POR). 2. Add the map (for Crywolf gate 118, index 38 in the thread) to the move bmd of every language, not only ENG. 3. Players usi...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2020-06-17
  2. Client di giocoIGCNS12

    IGCN Season 12: the server runs, but after loading the client says the game needs to be updated.

    1. Open IGCData/IGC_MapServerInfo.xml on the server and read the client version and serial. 2. Put the same IP, version and serial in the client info editor (serverinfo generator). 3. Gen...

    ✓ Confermato dall'autore della discussioneTuServerMU · 2019-04-06
  3. Client di giocoIGCNS9

    A custom jewel shows on the ground but has no image in the inventory (IGC Season 9.5 files).

    The jewel was missing from itemTRSData.bmd in the client. Add the item there as well as in item.bmd and the tooltip files.

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2025-11-01
  4. Client di giocoIGCNS9

    Antihack kicks the player on connect; the GameServer log says 'Invalid Game-Client files' with a SkillCRC mismatch (IGCN Season 9 E2).

    1. Read the log line: SkillCRC shows two values (received / expected). 2. In GameServer Data/Common.ini set SkillCRC to the value your client sends (here 0xBA40895A instead of 0x6D203B2D)...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2023-11-26
  5. Client di giocoIGCNS12

    Selecting the server gives 'new version of the game is required' (Season 12 IGC files and client from a video guide).

    Make the serial (and version) set in the client main exactly equal to the serial and version in the server files, then restart GameServer.

    ✓ Confermato dall'autore della discussioneTuServerMU · 2018-08-21
  6. Client di gioco

    How to install a downloaded Lorencia map skin (client folders and server .att file)

    1. Read the notes in the archive or its release thread first. 2. Put the two folders of the skin into the client Data\ folder and replace all files. 3. On the server, copy the skin's .att...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2017-01-09
  7. Client di gioco

    Every MU client suddenly shows Portuguese text (reads Data/Local/Por instead of Eng) after trying another client

    1. The other client changed a registry value that every client reads. 2. Run regedit.exe and go to HKEY_CURRENT_USER\Software\Webzen\Mu\Config. 3. Change LangSelection to Eng: the clients...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2014-08-12
  8. Client di giocoS2

    Login fails with "error-L1 : serial error [account] WSARecv() failed with error 10038" (Season 2 server)

    1. The serial of the main does not match the server: the GameServer window shows its serial (here muservicesinfoss) and the main has another one (here k5lEopalwaudns8h). 2. On the server...

    ✓ Confermato dall'autore della discussioneRaGEZONE · 2017-08-12
  9. Client di giococlassic clients

    Where is the original Dinorant model to restore it in my client?

    1. Take it from a classic client (the thread used an SSeMU client). 2. The model is rider02.bmd in the client Item folder. 3. Copy it into your client.

    ✓ Confermato dall'autore della discussioneCreandoMU · 2021-02-24
  10. Client di gioco1.04D

    How to make a 1.04D main.exe connect to my server (version and serial)

    1. In the [GameServerInfo] section of the server config the client version is written as numbers: ClientExeVersion = 1.04.04 means 1.04D (the last number is the letter: 4 = D). 2. Put the...

    ✓ Confermato dall'autore della discussioneDarksTeam · 2008-05-16
  11. Client di gioco1.0L, 99b

    Client 1.0L / 99b: letters show bigger and some in Chinese

    1. Right click the desktop > Properties > Settings. 2. Set the screen resolution to 1280x1024 (the resolution the client expects). 3. Start the game again.

    ✓ Confermato dall'autore della discussioneDarksTeam · 2008-05-25
  12. Client di gioco97d+99i

    Disconnect when entering my 97d+99i server after changing the main.exe settings with a Main Editor

    For the 97d+99i files main.exe must not be edited. 1. Put back the original main.exe of the matching client. 2. Connect through the launcher set to your server address. 3. Log in again.

    ✓ Confermato dall'autore della discussioneDarksTeam · 2008-07-04
  13. Client di gioco

    MU Online lags badly while other games run fine

    1. Reinstall or update the video card drivers (the asker used a driver scanner to find the right ones). 2. Check that DirectX 9.0c is installed. 3. Start MU again.

    ✓ Confermato dall'autore della discussioneDarksTeam · 2009-05-20
  14. Client di giocoS3

    3rd class quest does not go on after the first part (DarkMaster SCF 7.4 server files)

    The client quest file did not match the server. 1. Get the Quest.bmd that matches your server files (a corrected one was attached in the thread). 2. Replace Quest.bmd in the client folder...

    ✓ Confermato dall'autore della discussioneDarksTeam · 2009-06-06
  15. Client di gioco

    How to remove the logo shown above the characters in the client

    1. Open the client folder Data\Logo. 2. The default logo file is Webzenlogo.ozj; replace or edit that file. 3. Start the client again.

    ✓ Confermato dall'autore della discussioneDarksTeam · 2009-08-25
  16. Client di gioco

    main.exe closes about one second after start on Windows 7 (after reinstalling the PC)

    1. Right click main.exe > Properties > Compatibility. 2. Tick Run this program in compatibility mode and choose Windows XP (or Windows 98). 3. Start the game again.

    ✓ Confermato dall'autore della discussioneDarksTeam · 2010-09-06
  17. Client di gioco97d+99i

    Every 97d client says to download a new client version when logging into a 97d+99i server

    The client version and serial in the server config do not match main.exe. 1. Open D:\MuServer\Data\lang\chs\commonloc.cfg. 2. Make ClientExeVersion (for example 0.97.04) and ClientExeSeri...

    ✓ Confermato dall'autore della discussioneDarksTeam · 2011-01-15
  18. Client di gioco97d+99i

    Wrong visual effect on the AA staff in the DarksTeam 97d+99i client

    The client's item files did not match the DarksTeam 97d files. 1. Get a Data\Item folder that belongs to the DarksTeam 97d client (a forum member posted a corrected copy as a zip in the t...

    ✓ Confermato dall'autore della discussioneDarksTeam · 2024-11-21
  19. Client di giocoSeason 6

    Season 6 (main 1.04 based, S6.15 files): Rage Fighter gloves show in the wrong position

    1. Add the gloves to CustomGlove.txt in the GetMainInfo folder. 2. In MainInfo.ini make sure the custom gloves system is on: DisableCustomClaws = 0 and DisableCustomGlove = 0 (0 means ena...

    ✓ Confermato dall'autore della discussioneTUServerMU · 2021-09-29
  20. Client di giocoSeason 6

    Two separate servers (not subservers) both show in the client as server 1 with the same name

    The client serverlist file was broken, not the server codes. 1. Replace the client Data serverlist.bmd with a working one (for example from another client of the same version) and edit th...

    ✓ Confermato dall'autore della discussioneTUServerMU · 2021-06-18

MuADMINS Community Alpha: gratuito, fatto dalla community, in sviluppo attivo.